BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
MT tyres. 215/75/15
- 1066Boy
- Topic Author
- Visitor
-
Public
My extreme muds are ok on road but the noise when you are over 30 mph gets a bit wearing after a few miles.
After many hours on the internet I have narrowed it down to just 2 (I think but who knows)
Hankook Dynapro MT or Kumho KL71's Both get good reviews and I like the look of them.
The is not much in it price wise so looking for comments from people on here that have used them.
Thanks Allan.
Please Log in or Create an account to join the conversation.
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- 1066Boy
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
Surprised Daniel didnt beat me to it
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Offline
- Platinum Member
-
Registered
- Posts: 2911
- Thank you received: 653
- Points: 8466.00
I personally am thinking of buying KL71's size 205 80 16
Jack
Please Log in or Create an account to join the conversation.
- 1066Boy
- Topic Author
- Visitor
-
Public
Out of interest Dan, what size are you running and how tall are they? I have about 28" to play with.
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
If fitting 29" 235 75 15 onto standard rims.....not so bad but the silver bullet without caster correction and -30 rims needs a bit of bashing on the front footwell seam....I'll correct the caster!
Please Log in or Create an account to join the conversation.
Pah....tiny ickle tyres!Daniel30 wrote: 215/75/15 and they are 27.5 inches I measured the front one
Please Log in or Create an account to join the conversation.
- 1066Boy
- Topic Author
- Visitor
-
Public
I can live with losing half an inch.Daniel30 wrote: 215/75/15 and they are 27.5 inches I measured the front one
Are your rims standard width? I know you have spacers but not sure on your rim size.
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
Allan: who's rim size you talking about ?
Please Log in or Create an account to join the conversation.