Advanced Search

Yes you should have 2 reverse lights up top and 1 fog
Also you can modify upper cluster
I have brake lights where the fog is and yellow bulbs in the indicators where reverse should be
reverse,fog and number plate now or rear door
No rear bumper

The bolts behind fuel filler flap just snapped off when i tried to remove
that's why on my current jimny i removed the hose clip.
Has i was only doing a body lift. 1 high lift farm jack was used
Lifted the rear first got around 6" clearance at back body mounts
Then after dropping in the 4 body blocks 2 @ rear 2 @ front seat belt mounts
i dropped the jack and moved to the front
Front lifted to around 5 to 6 inch under head lights

Jack

I like velcro a little to much
My other like is 3M acrylic foam tape this is how the rear fog and reverse lights are held on

Jack

I run these from a separate switch

Not good for reversing because of glare/reflection off window
You can over come this by making a surround that fits flush to the glass

I only use them as work lights as the ring reverse light on back door works from gear box

I have not read the whole thread but I used ring ones

Got them from eBay but think Halfords do them

Radio,cb,land metre light,rear work lights,2low (no longer needed manual hubs now)
and three spares all have their own fuses
2 sockets switched power and other constant live
and the big red key isolates the whole switch panel

@ Para yes only fog on right side
and yes you can modify the left cluster to take a bulb
www.bigjimny.com/index.php/forum/search?...te=all&childforums=1

Jack

yakuza wrote: On my 2005 car there is only blinkers and fog in the bumper.
Should be easy to relocate the blinkers to the upper reverse, make new reverse light(s) and just forget about the fog/highway light.
Rear fog light missing is not a MOT fail in Norway if it is completely removed. If it is there it must work though.

Yes would be possible just need to fit yellow T20 bulbs
just check your wire colours against the ones i posted
if wire colours match then all information is here

Jack

off side
fog light green wire + black wire earth
reverse light red wire + black wire earth
indicator green wire with yellow line + black wire earth

near side
indicator green wire with red line + black wire earth
rear lights red wire with yellow line + black wire earth
brake lights green wire with white line + black wire earth

more photos the better
like boot floor around the jack,down each side,under rear seats,behind headlights from under the bonnet,rear body mounts,
inner sills underneath
from past experience these are the places people will ask about for rust
also put a post in the for sale wanted section
good luck with the sale

Jack

modified a set of rear lights to put brake and indicators in upper position

started by cutting bulb mounts off

wrapping tape to fit the recess

then cut hole a 25mm step cutter would work fine

hi wanting to move rear lights from bumper,
i think i'm ok with most of it BUT number plate lights
have me stumped. could anyone tell me what colour wires go where
as after market lights have red and black two wires
and these things have four on each side
please HELP

Jack

i got myself a set of 7" x 1" front fogs to do the same
also got some soft rubber mat to cut to shape
to go around the lights upto the rear glass
to make a seal to stop glare
so you can see through the rear window easily

Jack

It will look the business when done Dave
Going to look at the blog
are you going to do a blog on the wiring
for the lights as i will be doing the
rear corner mods

Jack

hi as above is it possible to lift the rear body from chassis around 150mm
with the front mounts still attached/under headlights
is there anything else to be considered/removing

thanks Jack

i thought it was to do with spare wheel obstructing hazard/off side
indicator when rear door is open