BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
My Jimny named R&B
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
This setup may not be for everyone
Super soft.
Parts used 1" spring spacer (front drivers side)
4 rear Honda crv springs 1995-2001
SUP 011076
KYB RC5814
KILEN 54014
1 complete coil needs cutting off for rears
I took it from bottom
Shocks were from vit-mods +3"
Note I had to use my old Bush sleeves
Ones in shocks are a little to long (could be cut down)
Up Travel to bump stops 4.5" front rear 5" (leaving around 1" left on shock up travel)
Down travel they go far enough for springs to fall out
Spring clamps been ordered
I cannot say how much lift it gives as I didn't measure
I would guess ~3"
Attachments:
Please Log in or Create an account to join the conversation.
- Posts: 8808
- Thank you received: 1759
- Points: 36231.00
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
Gives a lot of body roll on corners (no arb fitted)
Not had chance to try off road but should get good articulation (or fall over)
cost me less than 200
Might save and get 4 adjustable shocks i'm happy with how soft the springs are
Please Log in or Create an account to join the conversation.
- Groundworker
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
Yes chopped off coil to make it sit level
Groundworker you may need to chop more off to suit your truck
Please Log in or Create an account to join the conversation.
- Posts: 8808
- Thank you received: 1759
- Points: 36231.00
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
Lambert wrote: So sort of mk1 range rover soft then. Cool.
Never drove a range rover lol. But 75kg me gets about 1" of body roll getting in
Please Log in or Create an account to join the conversation.
- Groundworker
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
Arches off
Sill covers off
NEVER TO BE REFITTED
I was surprised I can't push my fingers through
Can't see any welding needed
Quite a bit of mud packed in
Attachments:
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
Now time to decide how much needs cutting off and where from
7.50 16 here we come
Attachments:
Please Log in or Create an account to join the conversation.
- Posts: 8808
- Thank you received: 1759
- Points: 36231.00
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
since 2016.........i might have a problem.........
Them GEOLANDER X MT G005 cost more than my daily driver is worth
So maybe 900's next year
Please Log in or Create an account to join the conversation.