BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Winch control box fitting

Lambert
Away
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

27 Mar 2023 09:15 #248261 by Lambert

Replied by Lambert on topic Winch control box fitting

And with a bit of design thought a bracket could be made to allow access to the fuses. That's not the point. The point is there are a number of options with a little bit of thought.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

giacomom
Topic Author
Offline
Senior Member
Registered

27 Mar 2023 20:45 #248266 by giacomom

Replied by giacomom on topic Winch control box fitting

In the end here is the solution I found, fixed with 3 brackets to the wing I think it's an excellent position
Giacomo

The following user(s) said Thank You: Soeley

Please Log in or Create an account to join the conversation.

Roger Fairclough
Offline
Platinum Member
Registered

27 Mar 2023 21:16 #248267 by Roger Fairclough

Replied by Roger Fairclough on topic Winch control box fitting

I don't think you would get that box on top of the fuse box.

Roger

Please Log in or Create an account to join the conversation.

giacomom
Topic Author
Offline
Senior Member
Registered

28 Mar 2023 06:24 #248273 by giacomom

Replied by giacomom on topic Winch control box fitting

In fact I put it on the other side of the engine compartment....
Giacomo

Please Log in or Create an account to join the conversation.

Time to create page: 0.123 seconds

Search

Fast Font

BigJimnyMeet (North) 2024 (12 Jan 2024)

Winch control box fitting

Attachments:

The Legal Stuff