×
Fully Floating Rear Axle Kit (12 Apr 2022)

Brett and Riccy are please to announce the

G&D Floating Axle Kit

This add-in kit enables you to enhance your Gen3 Jimny to a fully floating rear axle.

Full details are in the download file below

DOWNLOAD DETAILS HERE

File Attachment:

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Re:Installation of new ABS rings?

More
21 Jan 2022 17:51 #241367 by LM42
Me and GV42, about to install the Floating axle conversion, and need to install the abs rings onto the hubs , any tips ? Hubs and rings are new !

Sent from my Redmi Note 8T using Tapatalk

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
21 Jan 2022 19:01 #241372 by Lambert
Do you have a press? If not warming the rings in an oven to 200c should produce enough clearance without structural alterations to the steel.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 21:28 #241380 by LM42
Do have a 12 ton press

Sent from my Redmi Note 8T using Tapatalk

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 21:31 #241381 by gv42
Replied by gv42 on topic Installation of new ABS rings?
Thank you Lambert.

Please Log in or Create an account to join the conversation.

More
23 Jan 2022 20:45 #241438 by Dirtbird
LM42 Qand GV42. Will ye post some pics of the conversion will make an intresting post.

Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.

Please Log in or Create an account to join the conversation.

More
27 Jan 2022 23:26 #241538 by LM42
So, after a bit of reading, we set about to fit the abs rings, we heated up the rings with a blow torch, and then just dropped into place!

Sent from my Redmi Note 8T using Tapatalk

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
28 Jan 2022 04:17 #241540 by Lambert
That's probably safer, I got I right telling off the last time I used the kitchen oven for something similar!

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.

Please Log in or Create an account to join the conversation.

Time to create page: 0.055 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.