×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

BREATHER

More
29 Sep 2020 09:04 #228612 by gv42
BREATHER was created by gv42
I AM GOING TO DO THE AXLE BREATHER , BUT NEED THE SIZE OF THE ELBOW FIT AND THE SIZE OF THREAD. THANKS MARK

Please Log in or Create an account to join the conversation.

More
29 Sep 2020 09:28 #228613 by HUN
Replied by HUN on topic BREATHER
No eBay APP ID and/or Cert ID defined in Kunena configuration

Usually kits are 1/8" BSP thread which needs 9mm hole before tap.

TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers

Please Log in or Create an account to join the conversation.

More
29 Sep 2020 09:34 #228614 by HUN
Replied by HUN on topic BREATHER
No eBay APP ID and/or Cert ID defined in Kunena configurationHere is a better kit! ;)


TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers

Please Log in or Create an account to join the conversation.

More
29 Sep 2020 11:07 #228616 by gv42
Replied by gv42 on topic BREATHER
thanks got the one from dave,,

Please Log in or Create an account to join the conversation.

More
29 Sep 2020 13:12 #228618 by X8GGY
Replied by X8GGY on topic BREATHER

gv42 wrote: thanks got the LAST one from dave,,


Thanks! ;)

Please Log in or Create an account to join the conversation.

Time to create page: 0.103 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.