×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Spring clamps / location cones

More
06 Sep 2020 10:57 #227817 by Gadget
I've fitted Old Man Emu shocks to my Gen4. These are designed to go with their 40mm lift springs, but I had planned to keep the stock springs as I like the ride height as it is.

No problems with installation or function, however the shocks allow about 70mm of additional droop. I'm fitting extended brake lines, so not concerned about those, but at full articulation there's enough room for the stock springs to become loose.

Are there spring clamps/location cones available that would work with the Gen4?

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
06 Sep 2020 13:46 #227830 by Lambert
Jimnybits do rear ones for the 3 that may work?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Gadget

Please Log in or Create an account to join the conversation.

More
06 Sep 2020 14:19 #227831 by mlines
The springs are the same, so Gen3 ones will work,

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Gadget

Please Log in or Create an account to join the conversation.

More
06 Sep 2020 18:40 #227845 by X8GGY
No eBay APP ID and/or Cert ID defined in Kunena configurationI've still got a few left too -

The following user(s) said Thank You: Gadget

Please Log in or Create an account to join the conversation.

More
06 Sep 2020 18:41 - 06 Sep 2020 18:44 #227846 by X8GGY
Fitted picture (on the Buggy) -

Attachments:
Last edit: 06 Sep 2020 18:44 by X8GGY.
The following user(s) said Thank You: mlines, Gadget

Please Log in or Create an account to join the conversation.

More
06 Sep 2020 23:10 #227857 by zukebob
It sounds like you will have the additional extension issue solved. Have you thought about the possible need for extending your bumpstops? If the extended length of the new shock is longer, the compressed length should be longer too.

Just a thought

I started out with nothing & still have most of it left

Please Log in or Create an account to join the conversation.

Time to create page: 0.132 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.