×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Track rod ends
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
01 Aug 2020 07:09 #225926
by jackonlyjack
Track rod ends was created by jackonlyjack
Can anyone confirm that M16 x 1.5
is the correct thread size
is the correct thread size
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1039
- Thank you received: 305
- Points: 5197.00
01 Aug 2020 08:55 #225929
by sniper
Replied by sniper on topic Track rod ends
I have got a pair of new ones in the shed, if they are any use Jack, no good to me now....
sniper
sniper
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Topic Author
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2909
- Thank you received: 651
- Points: 8451.00
01 Aug 2020 10:01 #225932
by jackonlyjack
Replied by jackonlyjack on topic Track rod ends
Don't need any at the mo
Just needed thread size so i can get rh/lh taps and some cds tube
Keep hold of them for me Pal
Just needed thread size so i can get rh/lh taps and some cds tube
Keep hold of them for me Pal
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3727
- Thank you received: 923
- Points: 9981.00
01 Aug 2020 10:21 #225933
by X8GGY
Replied by X8GGY on topic Track rod ends
I just sleeved the original steering bars JOJ ?
www.bigjimny.com/index.php/forum/18-buil...buggy-build?start=12
www.bigjimny.com/index.php/forum/18-buil...buggy-build?start=12
Please Log in or Create an account to join the conversation.
Time to create page: 0.102 seconds