× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Re:Heater core replacement

More
20 Jul 2020 11:02 #225389 by Old Neil
Has anyone done a how to replace heater core

Sent from my SM-A305YN using Tapatalk

Please Log in or Create an account to join the conversation.

More
20 Jul 2020 12:10 - 20 Jul 2020 12:11 #225391 by Reason2doubt
I have seen it done once and everything was stripped from the Jimny.

More recently...I coincidentally watched this video which explained why (logic is still the same):


On my list...but I will definitely have to put it off until the Jimmers is not my main car.
Last edit: 20 Jul 2020 12:11 by Reason2doubt.

Please Log in or Create an account to join the conversation.

More
20 Jul 2020 13:10 #225393 by Old Neil
Replied by Old Neil on topic Re:Heater core replacement

Reason2doubt wrote: I have seen it done once and everything was stripped from the Jimny.

More recently...I coincidentally watched this video which explained why (logic is still the same):



On my list...but I will definitely have to put it off until the Jimmers is not my main car.

Thanks R2D
i had one car there was two screws two hose's and it slid out not the jimny

Sent from my SM-A305YN using Tapatalk

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Online
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
20 Jul 2020 15:56 #225396 by Lambert
Replied by Lambert on topic Re:Heater core replacement
Had to have mine replaced as it started leaking after the head gasket was replaced. Not a bad job apparently but the entire dash has to come out.

Dreadnaught (black 2011)
The following user(s) said Thank You: Old Neil

Please Log in or Create an account to join the conversation.

More
22 Jul 2020 03:02 #225447 by Rabid Rhino
If you're near Dover, Leigh Catherick will do in in under a day.

Looking for a nice clean and straight LHD Jimny..... Not any more.
Got one that seems to have been magnatized and driven through the "Big Jimny Bits" parts stores too quickly so it missed a few items.
The following user(s) said Thank You: Reason2doubt

Please Log in or Create an account to join the conversation.

More
22 Jul 2020 10:28 #225453 by Old Neil

Rabid Rhino wrote: If you're near Dover, Leigh Catherick will do in in under a day.

Sorry RR
I live in Western Australia
Neil

Sent from my SM-A305YN using Tapatalk

Please Log in or Create an account to join the conversation.

Time to create page: 0.077 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.