×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Jimny will crank over but not start.
- JimnyCal
- Topic Author
- Visitor
-
Public
15 May 2020 14:45 #222275
by JimnyCal
Jimny will crank over but not start. was created by JimnyCal
I've just replaced the thermostat housing on the car, topped up with Coolant. Car will crank over fine, will not start up for whatever reason. I've checked everything over, everything is connected fine and back in place as it was. It started up fine revs died down, went to give it gas engine stopped, now it won't start again. I'm at my wits end here.
2003 M13A Jimny
2003 M13A Jimny
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8807
- Thank you received: 1759
- Points: 36226.00
16 May 2020 05:22 #222294
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Jimny will crank over but not start.
Did you take the inlet manifold off to do the thermostat?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
17 May 2020 09:32 #222378
by kirkynut
So as it was fine before you disturbed it, check your work on how well you put it back together. Is that where you are going with this Lambert.
There could be a big air leak?
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Jimny will crank over but not start.
Lambert wrote: Did you take the inlet manifold off to do the thermostat?
So as it was fine before you disturbed it, check your work on how well you put it back together. Is that where you are going with this Lambert.
There could be a big air leak?
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8807
- Thank you received: 1759
- Points: 36226.00
17 May 2020 12:37 #222398
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Jimny will crank over but not start.
Or a vacuum leak or missed loom connector. Alternatively if something impacted one of the sensors?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Time to create page: 0.102 seconds