×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Ring and pinion

  • VITAC
  • Topic Author
  • Visitor
  • Visitor
    Public
28 Mar 2020 20:58 #220378 by VITAC
Ring and pinion was created by VITAC
Hi guys ... Does anybody know this pinion ring set. Is made in china and i have second thoughts as i don t know the manifacturer.
I have already placed a M16A motor that can easily run the 205/80/16 tyres. The problem is that the clunch already has a very hard time especialy in the city .This will go worse if i go to 235/70/16 tyres. So a reduction of 13% will be really ok. My vvt has a dif ratio 4.3 . So what this set promise i ll get this 13% reduction
Please check the link
#Aliexpress US $399.00 | Jimny Car Styling Front And Rear Final Reduction Gears Set 4.625/4.875 Ratio
a.aliexpress.com/_dX1Dh7u

Please Log in or Create an account to join the conversation.

  • Jasongds
  • Visitor
  • Visitor
    Public
28 Mar 2020 22:21 #220388 by Jasongds
Replied by Jasongds on topic Ring and pinion
Surely it's your bearings you need to be top quality,Toyo etc,

Please Log in or Create an account to join the conversation.

More
28 Mar 2020 22:26 #220389 by sniper
Replied by sniper on topic Ring and pinion
Raptor do a 4.63

H&M do a 5.12

sniper
The following user(s) said Thank You: VITAC

Please Log in or Create an account to join the conversation.

  • VITAC
  • Topic Author
  • Visitor
  • Visitor
    Public
29 Mar 2020 01:42 #220393 by VITAC
Replied by VITAC on topic Ring and pinion
Anybody tested these ...or will break apart at the fist slap:)

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
29 Mar 2020 10:27 #220402 by Lambert
Replied by Lambert on topic Ring and pinion
As suggested above there are more locally manufactured products available with a much higher quality reputation. Value for money is more important than initial cost to purchase.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
29 Mar 2020 13:17 #220420 by Busta
Replied by Busta on topic Ring and pinion
A cheaper and less risky option would be fitting the transfer case from an automatic vvt Jimny.

Please Log in or Create an account to join the conversation.

  • VITAC
  • Topic Author
  • Visitor
  • Visitor
    Public
29 Mar 2020 22:18 #220451 by VITAC
Replied by VITAC on topic Ring and pinion
I considered this option but my i will rev around 4100rpm to keep a speed of 100km /h (i think this around 55-60mph)

Please Log in or Create an account to join the conversation.

More
30 Mar 2020 07:45 - 30 Mar 2020 07:46 #220457 by Busta
Replied by Busta on topic Ring and pinion
Yes, it's a 30% drop so quite noticeable. 235/70r16 are 10% bigger than standard. You could go for Auto transfer case and pre-vvt manual diffs (3.9 rather than 4.3), which would bring it back to a 20% drop and still using Suzuki parts.
100km/h is 62mph.
Last edit: 30 Mar 2020 07:46 by Busta.

Please Log in or Create an account to join the conversation.

Time to create page: 0.115 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.