×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re:rear axle breather
Less
More
- Posts: 310
- Thank you received: 16
- Points: 185.00
24 Mar 2020 09:02 #220208
by safari
if u worry u die if u dont worry u still die so why worry
rear axle breather was created by safari
yesterday i tried to drill the breather valve of the axle for the extention pipes unfortionatly the drill bit broke and fell in the housing
tried to empty the oil but nothing came out . I would like to know if the inside breather is plastic or metal or any idea how to take them off without removing the whole diff
TKS
tried to empty the oil but nothing came out . I would like to know if the inside breather is plastic or metal or any idea how to take them off without removing the whole diff
TKS
if u worry u die if u dont worry u still die so why worry
Please Log in or Create an account to join the conversation.
- Max Headroom
- Offline
- Banned
-
Registered
- OPEN AIR MOTORING... 93 MILLION MILES OF HEADROOM
Less
More
- Posts: 1091
- Thank you received: 217
- Points: 4154.00
24 Mar 2020 09:29 #220209
by Max Headroom
IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Replied by Max Headroom on topic rear axle breather
Strong magnet?
IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1039
- Thank you received: 305
- Points: 5197.00
24 Mar 2020 14:42 #220215
by sniper
Replied by sniper on topic rear axle breather
Try to fish it out but be sure to compare the broken drill piece against the remaining bit, then you will know if you have all of it.
If not it is a strip down and wash out.....
sniper
If not it is a strip down and wash out.....
sniper
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3727
- Thank you received: 923
- Points: 9981.00
24 Mar 2020 14:51 - 24 Mar 2020 14:52 #220217
by X8GGY
Replied by X8GGY on topic rear axle breather
You shouldn't need to drill it?
You just pull the cap off and then tap the inside of the remaining tube on top of the axle?...
You just pull the cap off and then tap the inside of the remaining tube on top of the axle?...
Attachments:
Last edit: 24 Mar 2020 14:52 by X8GGY.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 310
- Thank you received: 16
- Points: 185.00
24 Mar 2020 19:44 #220228
by safari
if u worry u die if u dont worry u still die so why worry
Replied by safari on topic rear axle breather
So when you take the cap off what is under or what shall you find
if u worry u die if u dont worry u still die so why worry
Please Log in or Create an account to join the conversation.
24 Mar 2020 19:56 #220229
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic rear axle breather
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Attachments:
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 310
- Thank you received: 16
- Points: 185.00
24 Mar 2020 19:58 #220230
by safari
if u worry u die if u dont worry u still die so why worry
Replied by safari on topic rear axle breather
Tks now is more clear is that button plastic
if u worry u die if u dont worry u still die so why worry
Please Log in or Create an account to join the conversation.
24 Mar 2020 20:37 #220232
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:rear axle breather
It's fairly hard rubber I think
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 310
- Thank you received: 16
- Points: 185.00
25 Mar 2020 08:32 #220246
by safari
if u worry u die if u dont worry u still die so why worry
Replied by safari on topic Re:rear axle breather
tks everybody for the help tonight i give it a try again
if u worry u die if u dont worry u still die so why worry
The following user(s) said Thank You: X8GGY
Please Log in or Create an account to join the conversation.
Time to create page: 0.147 seconds