×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Center Console Dimension
Less
More
- Posts: 760
- Thank you received: 225
- Points: 1804.00
16 Mar 2020 06:03 #219904
by zukebob
I started out with nothing & still have most of it left
Center Console Dimension was created by zukebob
I was very close to pulling the trigger on purchasing reduction gears for my push-button transfer case. Martin's article on the SJ413 case rebuild has now seduced me away from staying with the push-button system. The thing that I am struggling with now is how I integrate the shift lever in the newer automatic. I am hoping that one of the members (with the lever operated case) can provide a dimension. I am looking for the distance from the forward edge of the rear console to the forward edge of the shift lever boot (as shown in picture).
As shown below, I know that the cup holder on the forward console is in the way on mine. I would like to determine how much so that I can decide the best approach for accommodation.
Thanks
Bob
As shown below, I know that the cup holder on the forward console is in the way on mine. I would like to determine how much so that I can decide the best approach for accommodation.
Thanks
Bob
I started out with nothing & still have most of it left
Attachments:
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
16 Mar 2020 18:43 #219942
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Center Console Dimension
here you go...
and incase you were wondering about an older manual gearstick surround (sorry its upside down ):
Thanks for the FOX stickers as well. I think ive forgotten to say they arrived, so a big thank you just in case
and incase you were wondering about an older manual gearstick surround (sorry its upside down ):
Thanks for the FOX stickers as well. I think ive forgotten to say they arrived, so a big thank you just in case
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Attachments:
The following user(s) said Thank You: zukebob
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 760
- Thank you received: 225
- Points: 1804.00
17 Mar 2020 00:42 #219963
by zukebob
I started out with nothing & still have most of it left
Replied by zukebob on topic Center Console Dimension
And a big thank you to you Riccy. That covers everything I need. I may purchase one of the earlier consoles just to determine the possibility of splicing it to the upper portion of a newer model. Sure hate losing my cup holder.
As far as the Fox stickers go, I'm just glad you received them. You can never be too sure when you send something out in the Philippine mail.
As far as the Fox stickers go, I'm just glad you received them. You can never be too sure when you send something out in the Philippine mail.
I started out with nothing & still have most of it left
The following user(s) said Thank You: Riccy
Please Log in or Create an account to join the conversation.
Time to create page: 0.116 seconds