×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Stiff transfer lever

More
08 Jan 2020 08:49 #217098 by RogersJimmy
The transfer lever on my 2001 model is stiff to operate, especially going into low range. It has been getting worse. Any ideas please?

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
08 Jan 2020 08:56 #217099 by Lambert
Replied by Lambert on topic Stiff transfer lever
Do you use it regularly? If not a bit of lubrication of the linkage might not go amiss. Also what condition are the transfer box mounts in, could they benefit from being replaced? After that an oil change might also help. Those are the cheapest options to try first.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: RogersJimmy

Please Log in or Create an account to join the conversation.

More
09 Jan 2020 12:49 #217126 by Busta
Replied by Busta on topic Stiff transfer lever
I'd say it's not unusual. I use mine regularly and I find that it can be stiff one day and not the next but I've never worked out why.
The following user(s) said Thank You: RogersJimmy

Please Log in or Create an account to join the conversation.

Time to create page: 0.087 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.