×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Gen 4 Stiffer Springs

  • ROjames
  • Topic Author
  • Visitor
  • Visitor
    Public
18 Dec 2019 09:31 #216543 by ROjames
Gen 4 Stiffer Springs was created by ROjames
Hi guys. Does anyone know of a stiffer spring setup for the Gen4? I am not looking for a lift or different dampers, just the springs on their own.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
18 Dec 2019 10:11 - 18 Dec 2019 10:11 #216544 by Lambert
Replied by Lambert on topic Gen 4 Stiffer Springs
Standard height heavy duty springs don't as far as I am aware exist for any coil sprung Jimny. The nearest I am aware of is the front springs off the European gen3 diesel but even though they are firmer they also provide a minimal lift. If you're successful with your search please spread the information.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Last edit: 18 Dec 2019 10:11 by Lambert.

Please Log in or Create an account to join the conversation.

  • CC Baxter
  • Visitor
  • Visitor
    Public
18 Dec 2019 10:53 #216546 by CC Baxter
Replied by CC Baxter on topic Gen 4 Stiffer Springs
If you stiffen the springs the damping won't match, it really depends how dedicated you are and how much money you're prepared to spend. You can always get springs made to your own specifications. I had some springs made to order by a German company called Wilbers, they were expensive but I wasn't paying. Chris

Please Log in or Create an account to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.