×
. . (01 Nov 2019)
× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

1996 JA22W (Japanese) Suspension

More
05 Nov 2019 03:37 #215373 by JA22WCanada
New to the forum. I've imported a Japanese 1996 Jimny - JA22W with K6A engine to Canada. I need to replace the shock absorbers as their completely worn out but everything listed on line is for 1998 and newer. Anybody on this forum familiar with the Japanese Domestic Jimny's. I think it has a 1 or 2" lift in it.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
05 Nov 2019 04:58 #215374 by Lambert
Not a very common model over here and the bigger issue is that if it has been lifted then the standard dampers won't work with the additional height unless it has been done with spacers. Have you cleaned and examined a damper to see if it has any stamped markings to give a clue of a part numbers etc.?

Dreadnaught (black 2011)

Please Log in or Create an account to join the conversation.

More
05 Nov 2019 05:59 #215379 by yakuza
And of course a picture of the car and especially suspension setup would help as well as we have been looking at pictures of this since the beginning of the internet.. :)

2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, 17%/87% high/low gears.

Please Log in or Create an account to join the conversation.

Time to create page: 0.127 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.