×
BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



20TH OCTOBER 2019

NOW BOOKING - CLICK HERE


See HERE for details - See HERE for discussion

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Cylinder head

More
11 Aug 2019 07:38 #212020 by dumb_dom
Cylinder head was created by dumb_dom
Hey guys!

Trying to source a new cylinder head and I’ve found one reconditioned. However they don’t know if it’s VVT or non VVT.
Is their any way to tell through these photos?


Thanks in advance!


Sell one buy another
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Aug 2019 08:47 #212022 by Keithy
Replied by Keithy on topic Cylinder head
Doesn't look like my vvt


Attachments:

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Site Sponsor
  • Site Sponsor
    Registered
  • J999 MNY Bashing around Carlisle
More
11 Aug 2019 11:56 #212025 by Riccy
Replied by Riccy on topic Cylinder head
yep hard to tell. This picture is a vvt...



Do you need VVT or not? Ive got 2 complete M13 VVT engines going spare...

J999 MNY M16 VVT
R7me gbox & 5.16 Rocklobster, 33" Toyo MT, 2x ARB Locker diffs, 7" lift, Recaro's, etc

SL06 ULS ULYSSES M18 VVT
Pickup/tipper, R7me gbox & 4.3 Rocklobster, 31" Cooper STT pro, 2x ARB Locker diffs, 4" lift, OMP seats, Poly bushd', Caged, etc

www.youtube.com/user/riclemus
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Aug 2019 12:14 #212026 by dumb_dom
Replied by dumb_dom on topic Cylinder head
Thanks so far guys. They seller says “they don’t think it’s off a VVT engine” and they are based on UAE so it’s a long way to go to return it.

And it’s a non VVT I need Riccy, cheers

Sell one buy another

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Site Sponsor
  • Site Sponsor
    Registered
  • J999 MNY Bashing around Carlisle
More
11 Aug 2019 12:18 #212027 by Riccy
Replied by Riccy on topic Cylinder head
The left hand side cam pulley hasnt got enough bolt holes for the things you see on Keith and my pictures, so most likley is non VVT.

I would have thought it possible to get one in the UK easier than UAE? Try contacting James Priestly (J999pre on here). Otherwise theres CAM suzuki and a whole host of others.

J999 MNY M16 VVT
R7me gbox & 5.16 Rocklobster, 33" Toyo MT, 2x ARB Locker diffs, 7" lift, Recaro's, etc

SL06 ULS ULYSSES M18 VVT
Pickup/tipper, R7me gbox & 4.3 Rocklobster, 31" Cooper STT pro, 2x ARB Locker diffs, 4" lift, OMP seats, Poly bushd', Caged, etc

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.105 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.