BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

gen 3 boot liner for under a tener

Start
Prev
1
Next
End

barnsley john
Topic Author
Visitor
Public

18 Jun 2019 18:39 #210108 by barnsley john

gen 3 boot liner for under a tener was created by barnsley john

may have been covered before but I decided to make a boot liner from rubber mats from b @ q £9 pack of 6
with the jimney still been quite new I thought of protecting boot space when seats are down
so this is basically what I did this is the mk 1 model I am Shure this could be made better but 1 hr a bit of cutting and tape and it was in
so step 1
was 4 interlocking mats
step 2 a bit of measuring in boot
step 3 tape back of mats with tape
step 4 score on reverse with Stanley so it bended
step 5 glued Velcro bits on to form the small kick up over back seat and also would stick to carpet at back of seat
shown in photos
any advice for mk2 model please feel free to advice
but mk 1 looks ok for now and cost less than 10 pound thanks john