BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



See HERE for details - See HERE for discussion

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

CMP Sensor Case

  • Posts: 7
  • Thank you received: 0
  • Points: 1.00
10 Aug 2018 05:17 - 10 Aug 2018 05:22 #194959 by jonnz
CMP Sensor Case was created by jonnz
Have Leaky Sensor Case and got new O-ring. Just wondering does graphic from Service Manual show application of sealant
as highlighted green? or as highlighted red and as in picture found online?

Last edit: 10 Aug 2018 05:22 by jonnz. Reason: mistake

Please Log in or Create an account to join the conversation.

  • Posts: 2565
  • Thank you received: 448
  • Points: 529.00
10 Aug 2018 10:37 #194976 by facade
Replied by facade on topic CMP Sensor Case
The green. A new correct o ring will seal perfectly without any sealant in the way. Sealant is for when you are trying to get a flattened baked old o ring to seal.

If it suddenly breaks, go back to the last thing that you did before it broke and start looking there :)

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.166 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.