BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Re:Steel rims

Start
Prev
1
Next
End

Lasse
Topic Author
Visitor
Public

25 Jan 2021 18:13 #232177 by Lasse

Steel rims was created by Lasse

hey everyone

What ET number can be fitted to a gen 4 with a 2" lift without the tyres are rubbing against something.?

thanks ..

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

25 Jan 2021 18:26 #232178 by mlines

Replied by mlines on topic Re:Steel rims

Depends on the tyres as much as the rims

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

Lasse
Topic Author
Visitor
Public

25 Jan 2021 22:17 #232183 by Lasse

Replied by Lasse on topic Re:Steel rims

Thinking 215/75-15

The 235 is given a lot of smoke for being to big and make the car slow - but looks pretty awesome with the big Tyres..!

Please Log in or Create an account to join the conversation.

Lambert
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

26 Jan 2021 05:02 - 26 Jan 2021 05:04 #232192 by Lambert

Replied by Lambert on topic Re:Steel rims

Couple of assumptions the tyre is not a remoulded one and also is not a massive tread extreme type. Then the standard 5.5j et5 15 inch wheel will accommodate a 215.75 on standard height suspension. An after market wheel is most likely going to be wider so 6j or 7j and is probably going to be either et0 or a negative et and combining the two will possibly cause rubbing but how much is contingent on the age and condition of the suspension and how much it has settled over time.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Last edit: 26 Jan 2021 05:04 by Lambert.

Please Log in or Create an account to join the conversation.

B3Hulk
Visitor
Public

03 Feb 2021 09:49 #232438 by B3Hulk

Replied by B3Hulk on topic Re:Steel rims

Negative 13 offset with 215/75/r15 no rub with it flush against the body.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.078 seconds

Search

Fast Font

BigJimnyMeet (North) 2024 (12 Jan 2024)

Re:Steel rims

The Legal Stuff