×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Door seal treatment?

More
17 Nov 2020 20:19 #230156 by lightning
Not on the Jimny but on my Land Rover

The door seals squeak continuously while l am driving and l wonder if there's a rubber treatment that will stop them
from squeaking?

l've tried WD-40, silicone spray, and even grease. But the squeaking always returns.

ls there a specific product for door seals?

Please Log in or Create an account to join the conversation.

More
17 Nov 2020 23:26 - 17 Nov 2020 23:32 #230160 by Scimike
Replied by Scimike on topic Door seal treatment?
I have read lots of people singing the praises of this stuff:
Gummi Pflege
Not used it myself so not a personal recommendation. Can't hear the doors squeak over the rattles :laugh:

Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)
Last edit: 17 Nov 2020 23:32 by Scimike.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
18 Nov 2020 04:24 #230163 by Lambert
Replied by Lambert on topic Door seal treatment?
When I had the 90 I adjusted the door catches to pull the door a little tighter closed. That helped.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
18 Nov 2020 08:57 #230166 by lightning
Replied by lightning on topic Door seal treatment?
Good idea l will try both.

l've actually got some of the gummy pledge stuff from when l had my Z3

Please Log in or Create an account to join the conversation.

More
18 Nov 2020 18:48 #230183 by lightning
Replied by lightning on topic Door seal treatment?
lt worked!

The Gummi Pflege that is, and it was sat on the shelf in my garage all the time.

Please Log in or Create an account to join the conversation.

  • GeorgeC
  • Visitor
  • Visitor
    Public
19 Nov 2020 19:59 #230218 by GeorgeC
Replied by GeorgeC on topic Door seal treatment?
Good to see Lightning found a suitable product.

I use a Lanolin base spray lube, INOX MX3, on the fridge door seal, non toxic, food and rubber friendly.

Please Log in or Create an account to join the conversation.

More
19 Nov 2020 23:04 #230221 by Scimike
Replied by Scimike on topic Door seal treatment?

GeorgeC wrote: Good to see Lightning found a suitable product.

I use a Lanolin base spray lube, INOX MX3, on the fridge door seal, non toxic, food and rubber friendly.


So the Gen4 has a fridge as well, that's posh :laugh: :whistle:

Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)

Please Log in or Create an account to join the conversation.

Time to create page: 0.110 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.