×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Need a welder

More
25 Jun 2020 10:59 #223984 by me101
Need a welder was created by me101
Well, Little Jim has been sat doing nothing for a few weeks now, and still hasn't had the welding done. I think the guy that normally looks after this type of stuff for me is not wanting to do it, but doesn't want to say! Everything is starting to open up again, so want to get it back on the road. Anyone recommend a good mobile welder in the Doncaster area? Easy bit is the front bar (where anti-roll bar connects), behind the headlights could do with being looked at, but it is near the body mounts that are the big issue. Both sides of the car have decent sized holes, right on the body mounts (located at front of the doors). Best way I can see of sorting would be cut the mounts off, sort the holes, and weld the mounts back on. otherwise it would be a body off job.
Cheers

2007 Little Jim with cheap mods!
www.youtube.com/channel/UCeBDekO99Qk2aOmBmSmrI9w

Please Log in or Create an account to join the conversation.

More
25 Jun 2020 11:14 #223985 by sniper
Replied by sniper on topic Need a welder
I have just had a similar restoration done on my car, when the body was converted. Terry Lofley & Son in Shirebrook, Notts. 01623 742292.

His work was spot on and well worth the journey.....

sniper

Please Log in or Create an account to join the conversation.

More
25 Jun 2020 11:32 #223989 by me101
Replied by me101 on topic Need a welder
I did look at your build, and was impressed. If I can't sort local, I will give them a shout

2007 Little Jim with cheap mods!
www.youtube.com/channel/UCeBDekO99Qk2aOmBmSmrI9w

Please Log in or Create an account to join the conversation.

Time to create page: 0.081 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.