×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Body lift Jimmy 04 1.3 help
14 Jun 2020 14:24 #223576
by Scot The Sniper
Body lift Jimmy 04 1.3 help was created by Scot The Sniper
Long story bought this jimny 3 years ago put clutch in last week on putting it back in noticed ot had a broken front spring. The guy I bought it from said it had a 3" lift ok so went and bought 2 3" front springs fitted them now it looks like a monster truck at the front. Took advice was told keep the 3" springs on and put 3" springs on the rear but remove the body lift that the last owner must of done. Removed all the plastic blocks from the body to lower it back down but I think fitting these blocks the must of got extended body bolts I was told take the lift off and just bolt it back up there should not be a problem well there is a massive one the 2 rubber bushes one goes above the chassis and one below there is a about a 3" gap now I'm sure this is the problem where will I get the proper ones to fit on my jimny please.
Scot
.jpg[/attachment]
Scot
Attachments:
Please Log in or Create an account to join the conversation.
14 Jun 2020 14:38 #223577
by X8GGY
Replied by X8GGY on topic Body lift Jimmy 04 1.3 help
In your photo the "sleeve bolt" is still through the lower body mount. If you take that out the bush will then fit up under and against the chassis body mounting cup...
You then need to use nuts to attach the rubber bush and washer under the chassis body mounting cup... the two at the front of the doors and the two right at the back are 10mm metric FINE (1.25mm pitch) thread and the two behind the doors are 12mm metric FINE thread too...
I have some I can post to you if you can't source them
Dave
You then need to use nuts to attach the rubber bush and washer under the chassis body mounting cup... the two at the front of the doors and the two right at the back are 10mm metric FINE (1.25mm pitch) thread and the two behind the doors are 12mm metric FINE thread too...
I have some I can post to you if you can't source them
Dave
Please Log in or Create an account to join the conversation.
14 Jun 2020 14:40 #223579
by X8GGY
Replied by X8GGY on topic Body lift Jimmy 04 1.3 help
For clarity...
This is the sleeve bolt that needs removing...
Hope that helps
This is the sleeve bolt that needs removing...
Hope that helps
Attachments:
Please Log in or Create an account to join the conversation.
14 Jun 2020 14:43 #223580
by X8GGY
Replied by X8GGY on topic Body lift Jimmy 04 1.3 help
Hang on... this rings a bell? Was I speaking to you on eBay? Dave (ZookBOB) 
Please Log in or Create an account to join the conversation.
14 Jun 2020 15:07 #223583
by X8GGY
Replied by X8GGY on topic Body lift Jimmy 04 1.3 help
This MUST be you...
Attachments:
Please Log in or Create an account to join the conversation.
14 Jun 2020 15:26 #223584
by X8GGY
Replied by X8GGY on topic Body lift Jimmy 04 1.3 help
Here you go!
Metric fine (the thread that Suzuki use just to be awkward!)
Two bolts to go under the headlights into the chassis cupped mountings as yours will now be too long
Four 10mm nyloc locking nuts for the small body mounting studs, and...
Two 12mm nyloc locking nuts for the small body mounting studs
And below is my paypal email address, a tenner should cover the parts and postage
Hope that helps!
Dave
Metric fine (the thread that Suzuki use just to be awkward!)
Two bolts to go under the headlights into the chassis cupped mountings as yours will now be too long
Four 10mm nyloc locking nuts for the small body mounting studs, and...
Two 12mm nyloc locking nuts for the small body mounting studs
And below is my paypal email address, a tenner should cover the parts and postage
Hope that helps!
Dave
Attachments:
Please Log in or Create an account to join the conversation.
14 Jun 2020 17:06 #223589
by X8GGY
Replied by X8GGY on topic Body lift Jimmy 04 1.3 help
Just a tenner will do, to cover the parts and postage...
Dave
Dave
Please Log in or Create an account to join the conversation.
Time to create page: 0.204 seconds