BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Automatic gearbox advice..
- Jcg1694
- Topic Author
- Visitor
-
Public
Wanting some advice on my Jimny.. 2015 Automatic.. can anyone tell me what RPM they're revving at when running 60-70mph down motorways? I've been told these have an overdrive but not sure whether mines engaging correctly or not! Im revving at around 4k at 60mph.. and 4.5k at 70mph.. any advice or reply is appreciated. Thanks!
Please Log in or Create an account to join the conversation.
- Posts: 760
- Thank you received: 225
- Points: 1804.00
At the risk of stating the obvious, the JB43 auto shift lever has 2 positions for drive. In the "D - 3" position, if you move the lever a little to the right, the transmission will only shift from 1st to 3rd. If you have it solid to the left (still in D - 3), it will shift through all 4 gears.
I started out with nothing & still have most of it left
Please Log in or Create an account to join the conversation.
- Jcg1694
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Posts: 8811
- Thank you received: 1759
- Points: 36248.00
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Posts: 760
- Thank you received: 225
- Points: 1804.00
With a code, you may find one of theses is at fault:
I started out with nothing & still have most of it left
Attachments:
Please Log in or Create an account to join the conversation.
- Jcg1694
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Jcg1694
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
- Jcg1694
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Posts: 760
- Thank you received: 225
- Points: 1804.00
Output shaft speed sensor?
Not sure if your 188700 is the same code
I started out with nothing & still have most of it left
Attachments:
Please Log in or Create an account to join the conversation.
Jcg1694 wrote: I was thinking that myself in all honesty, this is the first jimny I've ever drove so wasn't expecting it to be a motorway kind of car, and didn't know anyone who has owned an automatic one either to ask if it was running as it should
Yeah, I'm not convinced that you have a problem. I remember driving a 1999 standard manual one to Wales from Essex years ago, which I later owned for a short while and that revved so highly in 5th we only did short bursts at 70 mph. That was a manual.
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
They're also driving the last iteration of the Gen 3.
Is there a third gear holding gear for you to force it to stay in 3rd and see what the revs are at 70?
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.