×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Making Jimny permanent all wheel drive
03 Feb 2020 18:52 #218032
by Riccy
they could be of use for a 6x6 conversion
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Making Jimny permanent all wheel drive
Jefferies wrote: I've been thinking about this conversion recently too so I'd be really interested to see how people approach it. There's a couple of Lada Niva remote transfer cases on eBay but they are sort of the wrong way round for a jimny as they cater for diffs that are offset towards the near side rather than the offside
they could be of use for a 6x6 conversion
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
03 Feb 2020 19:03 - 03 Feb 2020 19:06 #218033
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Making Jimny permanent all wheel drive
Is there any way to get a FreeLander MK1 viscous unit into the front propshaft?
Then you could drive it in 2wd or 4wd on the Jinmy transfer.
I've no idea how the Lexus gearbox works, but as Toyota dropped the centre diff as soon as they could on the Rav4, I doubt if there actually is one.
Then you could drive it in 2wd or 4wd on the Jinmy transfer.
I've no idea how the Lexus gearbox works, but as Toyota dropped the centre diff as soon as they could on the Rav4, I doubt if there actually is one.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.100 seconds