BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Jimny pinion bearings.
- Hastiekid
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Assuming you mean items 22 in the picture then they are £82.00 each for premium brand bearings and £30 each for budget brand
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Kumppari
- Visitor
-
Public
mlines wrote: I can get them
Assuming you mean items 22 in the picture then they are £82.00 each for premium brand bearings and £30 each for budget brand
i asked about those bearings not too long ago. if you only had said something then, would have saved some trouble and money. after lenghty net-searching i ended up buying them at the local suzuki dealer at 75€ per bearing.
oh well, such is life.
Please Log in or Create an account to join the conversation.
- Hastiekid
- Topic Author
- Visitor
-
Public
mlines wrote: I can get them
Assuming you mean items 22 in the picture then they are £82.00 each for premium brand bearings and £30 each for budget brand
No its the pinion bearings I'm after, that's no 5 and number 6 in the drawing. Do you have a price for these please?
Are we saying they are hard to get and purely automotive fitment?
Any help is much appreciated.
Please Log in or Create an account to join the conversation.
budget brand £11 for one and £13 for the other
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Hastiekid
- Topic Author
- Visitor
-
Public
mlines wrote: ok, £19 for one and £21 for the other, premium brand.
budget brand £11 for one and £13 for the other
That sounds good to me Martin, ill take a set of the premium ones if thats OK. Could you also supply seal no 7 for a 2011 jimny. I;m looking for a genuine seal, if i'm correct they have a bit of a flared rubber collar on them ?
How should I go about ordering and paying for them?
Please Log in or Create an account to join the conversation.
Can you confirm your reg number as the seal changed on different Jimnys
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Hastiekid
- Topic Author
- Visitor
-
Public
mlines wrote: Leave it with me and I will get you a price for the genuine seal tomorrow morning once Suzuki wake up
Can you confirm your reg number as the seal changed on different Jimnys
Martin
Yes mate its NA61 DWN.
Please Log in or Create an account to join the conversation.
So
Parts: £49.83
Postage (1st Signed) - £5
Total £54.83
Either Paypal to This email address is being protected from spambots. You need JavaScript enabled to view it. or I can give you details for Bank Transfer. Part is coming from Suzuki so likely to be a day or two.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Hastiekid
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Hastiekid
- Topic Author
- Visitor
-
Public
Cheers
Ian Hastie
Please Log in or Create an account to join the conversation.