BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Aftermarket steering wheel
- Yellostreak
- Topic Author
- Visitor
-
Public
Or does anybody know if the SJ/Vitara/Alto/Swift/Baleno ones fit and then I can try and find a boss for one of them..
before anyone mentions it, airbag is not an issue as my jimny 100% off road
Please Log in or Create an account to join the conversation.
- idiotmobil
- Offline
- Platinum Member
-
Registered
- Posts: 1824
- Thank you received: 118
- Points: 16.00
ive fitted one of these
JIMNYLESS
Please Log in or Create an account to join the conversation.
- Yellostreak
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- idiotmobil
- Offline
- Platinum Member
-
Registered
- Posts: 1824
- Thank you received: 118
- Points: 16.00
JIMNYLESS
Please Log in or Create an account to join the conversation.
- Posts: 961
- Thank you received: 75
- Points: 211.00
idiotmobil wrote: I didn't see it on the listing but mine had a Suzuki badge for the middle toke a bit of fiddling to get the indicators too cancel and the horn wired up but looks ok
i've thought of an aftermarket wheel too. what did you do with the airbag ? do you have any lights permanently showing as the airbag isn't there ? thanks
standard jimny - for now
Please Log in or Create an account to join the conversation.
- idiotmobil
- Offline
- Platinum Member
-
Registered
- Posts: 1824
- Thank you received: 118
- Points: 16.00
JIMNYLESS
Please Log in or Create an account to join the conversation.
- Dave cc
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
idiotmobil wrote: I stuck my wheel and airbag on a shelf in my workshop lights on but going to pull the bulb out before mot if all else fail ill stick the wheel back on but I wont need to
if the light isnt on it will pass but it should fail on the air bag missing seeing as you have a passengers air bag it should have a drivers one
Please Log in or Create an account to join the conversation.
- Posts: 961
- Thank you received: 75
- Points: 211.00
Dave cc wrote: Just un plug the cable to the airbag module its under the centre consol talkes minutes much easier than pulling the dash
can you explain exactly how this plug is accessed ?
can this be unplugged whilst the battery is connected or does the battery have to be disconnected first ?
will unplugging this disable the airbags and the light ~?
cheers
standard jimny - for now
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- idiotmobil
- Offline
- Platinum Member
-
Registered
- Posts: 1824
- Thank you received: 118
- Points: 16.00
markyp2000 wrote:
idiotmobil wrote: I stuck my wheel and airbag on a shelf in my workshop lights on but going to pull the bulb out before mot if all else fail ill stick the wheel back on but I wont need to
if the light isnt on it will pass but it should fail on the air bag missing seeing as you have a passengers air bag it should have a drivers one
not when I fit my tablet were the passangers airbag is lol just need to make the holder to go in its place
JIMNYLESS
Please Log in or Create an account to join the conversation.
- Posts: 961
- Thank you received: 75
- Points: 211.00
many thanksmarkyp2000 wrote: Remove trim from around the gear leaver the air bag ecu is there yellow plug just unplug it nothing will happen and the light will stay off just make sure the ignition is off and unpluging will stop all air bags and seat belt and light working
standard jimny - for now
Please Log in or Create an account to join the conversation.