× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.[/size][/color][/b]

What did you do to your jimny today?

More
01 May 2020 23:48 #221768 by jflynn2112
Today I bought a load liner and a wind deflector.

In the process of turning the Jimny into a micro-camper for post lockdown.

I'm in the market for a roof rack but they're so so expensive!
Attachments:

Please Log in or Create an account to join the conversation.

More
02 May 2020 01:18 #221769 by Rabid Rhino
Load liner with the "Jimny" logo.... Class !!!!
If its got a "Jimny" logo.... I want it

Looking for a nice clean and straight LHD Jimny..... Not any more.
Got one that seems to have been magnatized and driven through the "Big Jimny Bits" parts stores too quickly so it missed a few items.

Please Log in or Create an account to join the conversation.

More
02 May 2020 18:42 #221810 by Reason2doubt
Sprayed the last few interior plastic panels and got the sill plastics bolted on securely.

File Attachment:

Please Log in or Create an account to join the conversation.

More
02 May 2020 18:47 #221811 by Soeley
Attachments:

Please Log in or Create an account to join the conversation.

More
04 May 2020 20:44 #221890 by mlines
Completed the BigJimny Trailmaster lift kit install


Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: TillymintDLG

Please Log in or Create an account to join the conversation.

  • DAGZOOK
  • DAGZOOK's Avatar
  • Away
  • Gold Boarder
  • Gold Boarder
    Registered
  • First Time ZOOK owner!
More
04 May 2020 21:18 #221891 by DAGZOOK
Looks great Martin, can't wait for the installation video.

Please Log in or Create an account to join the conversation.

More
05 May 2020 19:22 #221919 by Reason2doubt
My favourite Gen4 Jimny looking even cooler now. Love it!

Please Log in or Create an account to join the conversation.

More
06 May 2020 00:06 #221927 by jflynn2112
I've booked in to get the roof glossed black.

I'm about to order new chunky tyres but I just need to triple check the fitting.

I ordered a front runner roof rack (just the two bars, not the full rack).

Oh and these, I'm particularly excited about.
Attachments:

Please Log in or Create an account to join the conversation.

More
07 May 2020 08:26 #221974 by TillymintDLG
Drawer Update:
'Just get on with it Dad!'



Fitted drawer slides (450mm from Screwfix £5.99 pair)





Drawer



Lined with 8mm Yoga mat



Drawer front on but ran out of black paint!



Done and easy to remove too!



Gaz
Attachments:

Please Log in or Create an account to join the conversation.

More
07 May 2020 09:53 - 07 May 2020 10:00 #221979 by TillymintDLG
Fitted worklight onto rear door. (easier than fitting to the roof/rack IMO







Just unplugged the screen demister wires, extended them to worklight and
now it runs from the rear window heater switch. For now anyway, until I can
get a Live feed into the back door! I'm wondering if I could get another cable
through the r/door harness flexy conduit?



Any way, while I was there, I fitted a WiFi reversing camera on the inside of the window...
It only needs a 12v feed and Thanks to a post by Scimike, I wired it up to the switched
Live to the wiper motor. The pic quality is better than I expected as its looking through dark film and,
I can monitor the view on my tablet in the House!



Gaz
Attachments:
Last edit: 07 May 2020 10:00 by TillymintDLG. Reason: Forgot a photo...

Please Log in or Create an account to join the conversation.

More
07 May 2020 12:20 #221985 by Reason2doubt
Excellent implementation. I like how you have done that - nice and neat.
The following user(s) said Thank You: TillymintDLG

Please Log in or Create an account to join the conversation.

More
07 May 2020 13:05 #221989 by jackonlyjack
Easily fit extra wires through the sleeved grommet
I managed to get 6 extra 1.5mm tri-rated through mine ;)
The following user(s) said Thank You: TillymintDLG

Please Log in or Create an account to join the conversation.

Time to create page: 0.845 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.