×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

What did you do to your jimny today?

More
10 May 2022 19:45 #243291 by Soeley
The following user(s) said Thank You: gv42

Please Log in or Create an account to join the conversation.

More
10 May 2022 19:55 #243292 by gv42
Cleaned and painted with buzzweld passiv8 primer

Sent from my Redmi Note 8T using Tapatalk

Please Log in or Create an account to join the conversation.

More
11 May 2022 19:00 #243298 by gv42
2 coats of buzzweld FXliner ceramic

Sent from my Redmi Note 8T using Tapatalk
The following user(s) said Thank You: Soeley

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
12 May 2022 03:21 #243299 by Lambert
Tidy job there.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
12 May 2022 20:17 #243302 by RainerK
This is a very nice job. I wish I could weld like this.

If you would want one advise, then you could think about starting and ending a weld not directly in the corner - start and stop somewhere in the straight part. I hope it is ok for you if I make this remark.

Please Log in or Create an account to join the conversation.

More
13 May 2022 21:43 #243308 by gv42
First coat of FXliner ceramic paint

Sent from my Redmi Note 8T using Tapatalk

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
14 May 2022 04:49 #243309 by Lambert
Like the orange! Not sure how legal the bull bar is on the bumper though?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
14 May 2022 05:11 #243310 by Old Neil

gv42 wrote: First coat of FXliner ceramic paint



Sent from my Redmi Note 8T using Tapatalk

Just a matter of curiosity how much does the bull bar weigh?and i guess you are putting on a winch?

Sent from my SM-A336E using Tapatalk

Please Log in or Create an account to join the conversation.

More
14 May 2022 05:44 #243311 by gv42
About 45 kilo, then the winch

Sent from my Redmi Note 8T using Tapatalk
The following user(s) said Thank You: Old Neil

Please Log in or Create an account to join the conversation.

More
14 May 2022 10:47 - 14 May 2022 10:53 #243313 by Soeley
Not done any mods for a while, as I have my Jimny pretty much how I want it. But I saw a magic box on Aliexpress and thought it would be worth a try.
Basically it opens and closes your windows using the remote key fob.
It is working as it should and one bonus which I didn't expect, is that it has now turned the passenger side window into a one touch button, the same as the drivers window 


Choose LHD or RHD when ordering.


The loom as it comes, no cutting or splicing into the Suzuki wiring at all.


Remove the connector from behind the switch panel.


Plug the loom into the switch panel and connect the loom to the Suzuki connector.


Plenty of room up there to stick the module box and place the wiring.


Feed the long wire out across to the driver's side.


Behind the trim panel is the connector that feeds the wires through into the door.


Unplug.


And connect up the loom same as before.

youtube.com/shorts/E4xc0GsEZ7w?feature=share
One touch control for passenger window.

youtube.com/shorts/nRt3O7_SOA0?feature=share
Get out the car with windows open and simply lock the car.

On approach to the car simply press Unlock-lock-Unlock to open the windows, you can stop the windows where you want by pressing the unlock again where required.

It can also just open the window a crack, but this is only about 10mm, 25 to 50mm would have been ideal.
Attachments:
Last edit: 14 May 2022 10:53 by Soeley.
The following user(s) said Thank You: Lambert

Please Log in or Create an account to join the conversation.

More
15 May 2022 20:57 #243324 by DrRobin
Fitted the summer wheels, the winter wheels will come out for the meet up though.

 

2020 blue SZ5
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Attachments:

Please Log in or Create an account to join the conversation.

More
16 May 2022 19:23 #243332 by DrRobin
Painted the spare wheel carrier. Not my best brush work, but at least a good thick coat of Hammerite will keep it rust free.

    

2020 blue SZ5
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.445 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.