×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!

Turbo M16A Jimny

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
21 Jan 2022 09:08 #241344 by Lambert
Replied by Lambert on topic Turbo M16A Jimny
Cheaper than a rod through the block I would have thought?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 09:20 #241345 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
This engine can handle half bar of boost with standard internals. Been done a lot on Suzuki swifts. They actually put the liana engine in as it has a low compression ratio compared to the high compression ratio one in the Suzuki swift sport. Also I paid £280 for the engine plus abit cleaning the head up at the machine shop. Forging it will cost thousands, not to concerned about the engine.

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 10:01 #241346 by sniper
Replied by sniper on topic Turbo M16A Jimny
I can source forged rods and pistons for £890 delivered if they are of interest....

sniper
The following user(s) said Thank You: Motleycrew

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 10:20 #241348 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
Will keep that in mind thank you

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 11:34 - 26 Jan 2022 19:11 #241355 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
Can you send me some information on the pistons and rods? Do they come with all the rings etc. I might get a newer m16a engine and build it on the side
Last edit: 26 Jan 2022 19:11 by Motleycrew.

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 14:17 #241358 by CharterBoat
Replied by CharterBoat on topic Turbo M16A Jimny
Hey guys,
i know this isn't about turboing or other force induction but I've found this 2013 s cross with a m16a vvt engine and I was wondering if I could just rip it out and put it in my 2006 vvt jimny? Or would I need an ecu, I'm looking for a bunch of the same answer cause I've had two guys tell me different things.

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 21:02 #241376 by sniper
Replied by sniper on topic Turbo M16A Jimny

Hey guys,
i know this isn't about turboing or other force induction but I've found this 2013 s cross with a m16a vvt engine and I was wondering if I could just rip it out and put it in my 2006 vvt jimny? Or would I need an ecu, I'm looking for a bunch of the same answer cause I've had two guys tell me different things.
You need an 05' to 10' engine, the trigger wheels changed and post 10' engines will not run on earlier ECU's.... Suzuki Liana bolts straight in... 

sniper

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 21:08 #241377 by sniper
Replied by sniper on topic Turbo M16A Jimny

Can you send me some information on the pistons and rods? Do they come with all the rings etc. I might get a newer m16a engine and build it in the side
rzcrewgarage.com

sniper
The following user(s) said Thank You: Motleycrew

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 22:38 #241384 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
Have been trying to decipher the wiring diagram, got the hang of most it. Pretty much all the wiring will be retained and the ECU will take the old ones place. The 4x4 vacuum module will be disabled and I will need to get manual front hubs in the future. I am going to use the vacuum hub line nipple from the inlet manifold and run a 3mm hose to the onboard map sensor to the ECU.
Attachments:

Please Log in or Create an account to join the conversation.

More
22 Jan 2022 09:16 #241395 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
Fitted vitara brakes a couple of weeks ago
Attachments:

Please Log in or Create an account to join the conversation.

More
22 Jan 2022 10:25 - 22 Jan 2022 17:16 #241396 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
This is the electrical hardware that cost me a small fortune. I decided to get a digital wideband controller as they are more reliable and enables closed boost control. The boost controller will keep tabs on the waste gate creeping open.
Attachments:
Last edit: 22 Jan 2022 17:16 by Motleycrew. Reason: Typo
The following user(s) said Thank You: Soeley

Please Log in or Create an account to join the conversation.

More
22 Jan 2022 10:29 #241397 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
*analogue or digital wideband makes closed boost control possible. You can get away with a narrow band controller and have the dyno use there own wideband o2 sensor on a stick stuffed in the exhaust to map the car.

Please Log in or Create an account to join the conversation.

Time to create page: 0.181 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.