×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!

jimny pickup finaly getting finished

More
18 Apr 2020 08:13 #221189 by Busta
Good to see a craftsman at work.



Is that an extended chassis I spot?

Please Log in or Create an account to join the conversation.

More
18 Apr 2020 09:00 #221191 by Jimny Dr
Hi busty
thanks for the comments, yes it was extended by 300mm to get a slightly larger load bed and put the axle in the centre of the bed
But it’s totally transformed the ride, it drives really nice
Take care
the doc

Please Log in or Create an account to join the conversation.

More
18 Apr 2020 18:31 #221225 by Jimny Dr
Had a few hours and did some work today guys
Bolting bits back on and shooting some waxoyl into the cavities
Take a look
The doc

Attachments:

Please Log in or Create an account to join the conversation.

More
18 Apr 2020 21:45 #221239 by Keithy
Some nice work going on right there!

Nice booth too!....move it to Leeds !! :D

I went a different way on the cab rear.....I'm different lol

Attachments:

Please Log in or Create an account to join the conversation.

More
19 Apr 2020 08:34 #221261 by Jimny Dr
Hi Keithy
Yes we all different, but want the same at the end and that’s a nice result, something we can be proud of and enjoy.
That’s some nice and fancy work you done there mate, and love the colour as well
Are you posting more pictures as you go along
Take care
The doc

Please Log in or Create an account to join the conversation.

More
20 Apr 2020 17:58 #221314 by Jimny Dr
Been working on fabricating the rear light bar over the past two days, all painted and fitted with new lights.
Now all finished and working a treat
Have a look guys
The doc

Attachment not found

]
Attachments:

Please Log in or Create an account to join the conversation.

More
20 Apr 2020 18:01 #221315 by Jimny Dr
Attachments:
The following user(s) said Thank You: Max Headroom

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
21 Apr 2020 04:03 #221325 by Lambert
Looking good. Like the flat deck, very practical.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
21 Apr 2020 07:34 #221335 by Jimny Dr
Hi lambert
Thanks for the comments, I have done 2 of these pickups now and made both of then with removable sides.
It does give you the ability to work the trucks in many ways.
Stay safe
The doc

Please Log in or Create an account to join the conversation.

More
21 Apr 2020 13:52 #221352 by Reason2doubt

Jimny Dr wrote: We just managed to get a few hrs on the truck today
Reece finished cleaning the rear half of the chassis and painted it with etch
Whilst I attacked the passenger side front panel


You did a fantastic job getting that chassis looking like new! What a result!

Sent you a quick PM, Jimny Dr.

Please Log in or Create an account to join the conversation.

More
22 Apr 2020 15:30 #221379 by Jimny Dr
Hi guys
Rear load deck now fully covered with 3 generous coats of black raptor and fitted to truck.
Also mounted the rear mudguards and petrol neck in situ
Going to start on body sides tonight and finish inside the cab ready for a valet
Have a look guys
Take care the doc
Attachments:

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
22 Apr 2020 16:16 #221384 by Daniel30
Replied by Daniel30 on topic jimny pickup finaly getting finished
Very nice ;)

Please Log in or Create an account to join the conversation.

Time to create page: 0.245 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.