BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now closed at 148 vehicles!!!

Looking forward to seeing everyone there

× Sell your bits!
NOTE: This is for members and their private sales/wants.
There are rules that suppliers have to follow (and many of you do follow the rules). However there have been a number of instances recently where "suppliers" have broken the rules.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum

Jimny Gen-33 Rear Fully Floating Rear Axle Kit - £800 + postage

20 Nov 2021 10:45 - 20 Nov 2021 10:48 #240239 by HUN


We are getting asked quite often now for a Jimny Gen-4 version for our Gen-3 Rear Floating Axle (strangely mainly from "down under").

If anyne who has a Jimny Gen-4 and would consider being our Guines Pig to test things out - of course the benefit for you is that we would give you a kit (Shafts and Adapter Plate) for free as part of the development.

Firstly, we need to have the rear shafts correctly measured, then the Rear ABS and Traction Control Sensor.

1) Measure Shafts:
To measure the rear shafts we would want the dimensions from end to flange face to compare with Gen-3 parts that we have. It will need to be measured as accurately as possible and as square as possible. Also some photos of how it was measured would be handy to ensure we work the same way on either side of the planet.

2) Re the ABS sensor setup:
With the floating rear you use the front abs sensors and trigger ring as you are aware. These sensors are a basic Hall effect sensor and simply rely on a tooth passing to generate a signal, which is why they are no issue on the Gen-3. There are more teeth and bigger gaps because it’s diameter is larger. This doesn’t seem to confuse the abs controller on the gen3, though it’s untested on the Gen-4 as yet obviously. Our only concern with the Gen-4 would be how it might affect the traction control, which presumably relies on the abs sensors to know what is happening.

Let me know, via an email to This email address is being protected from spambots. You need JavaScript enabled to view it.

I must say this is a very generous offer! Hey Gen4 Jimny owners out there! Let's see who is the fastest/smartest to get a bargain! Come on guys!

TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers
Last edit: 20 Nov 2021 10:48 by HUN.

Please Log in or Create an account to join the conversation.

17 Sep 2022 10:21 #244985 by X8GGY

Please Log in or Create an account to join the conversation.

Time to create page: 0.089 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.