A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Gearbox trouble

More
26 Jun 2019 16:47 #210325 by Riccy
Replied by Riccy on topic Gearbox trouble
Sounds like a good deal and fast service always good to see. Glad it worked out for you :-)

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 14:27 #210362 by sniper
Replied by sniper on topic Gearbox trouble
Just a final note.....

When the gearbox noise first manifested itself, I thought it was a loose panel around the nsf wheel, blamed the loose wheel arch liner and removed it. I then realised that the rattle (almost a tinny noise like pinking), disappeared in 5th gear. I had read on the forum, that this was a symptom of the classic R72 bearing failure. Noisy in all gears but 5th....

Without that nudge from what I had read, I may have used the box to the level where it was beyond repair.....

Thanks guys,

sniper

Please Log in or Create an account to join the conversation.

  • Daniel30
  • New Member
  • New Member
    Public
More
27 Jun 2019 23:01 #210391 by Daniel30
Replied by Daniel30 on topic Gearbox trouble
Not to bad for the price I got mine from cam suzuki think it was £850 delivered and my cousin fitted it, donor was a 16 plate, mine went the same as yours by the way you described it ;)

Please Log in or Create an account to join the conversation.

More
28 Jun 2019 21:00 #210408 by kirkynut
Replied by kirkynut on topic Gearbox trouble
I'm glad this came to a good conclusion for you. I'm lucky that the Jimny is a third car for us, so if it's broken I can fix it in my own time or if one of our dailies goes down, we have the Jimjam to fall back on.

Nonetheless, I've had a split radiator on the Mrs' car and a snapped power steering pump shaft on mine at the same time! It's a good job I can fix them myself and can be resourceful as we both work and have a young child. It gets stressful when your car is busted and you have commitments!

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

  • eddlane
  • New Member
  • New Member
    Public
More
20 Aug 2019 08:09 #212361 by eddlane
Replied by eddlane on topic Gearbox trouble
Sorry to bring up a slightly old thread.

Having the same issue here.

Just been quoted £894 down here in Devon, this isn't too far off the OP price in the end does it sound about right?


its £600 for the gearbox bearing job
£150 for gearbox removal/installation
and £144 for a clutch


Cheers all

Please Log in or Create an account to join the conversation.

Time to create page: 0.135 seconds
Joomla template by a4joomla