Product Information

High quality, Rough Country, shock absorbers. These come pre-fitted with the correct Bushes for a Jimny, you will not need to press bushes in or purchase separate bushes. They come with a Red shock boot included.

These are designed to fit the FRONT of Jimnys with a 3" to 4.5" Lift.

If you are lifting a Jimny then please note you will require extended Springs at the same time, you cannot lift a vehicle just by purchasing longer shocks.

When used in a 3" lift these provide more axle drop but with an increased risk of spring dislocation at the rear, you should consider using Offroad-Armory Spring Clamps to keep your springs in order! However by using these shock absorbers you have the option to go longer with the springs or spring spacers in the future

The shocks are sold separately but I strongly recommend that shock absorbers are changed in pairs and you buy a replacement bolt (see below)

In general, for a 3" Lift, you DO  require both extended brake lines and Castor Correction. These require BigJImny or equivalent pipes, the Goodrich extended ones are too short.

These are the oil filled "Nitro" series. These are good all-round performers which suit the Jimny well. Although Rough Country do high performance Gas shocks these are really designed for huge, heavy American 4x4's running Baja style events, not lightweight Jimnys in English mud and the Tesco's run. If you really want the Gas ones then I can do them to special order.

Here is what Rough Country have to say:

The Rough Country Hydraulic 8000 series shock absorbers incorporate self adjusting "Velocity Sensitive Valving". This revolutionary technology varies the resistance valving incorporated in the shock according to piston rod speed. This allows for a super smooth highway ride and outstanding control in rugged off road situations from the same shock, without turning any knobs or shock removal for re-adjustment.

Specifications:

• 9-Stage "Velocity Sensitive Valving"

• Massive 1 3/8" Bore

• Chromed Hardened 9/16" Piston Rod

• Spring Loaded Piston Rod Seal

• Military Spec. Fluid Rated To –50° C

• Poly-urethane bushings for long life

• Limited Lifetime Warranty

• White powder coat finish

• Radial tuned valving/super highway ride

PRICE IS FOR ONE SHOCK ABSORBER
 

You may also like these other products as well, click on the images....

Rough Country Shock Absorbers 3" Lift - REAR	BigJimny own brand 3" Lift Springs	Stainless Steel Extended Brake Lines	Bits4Vits Castor Correction Bushes	Front Shock Absorber Bolt

Be the first to review this product!

Price: £46.00

• Write review / comment