Difference between revisions of "Light bulbs"

From BigJimny Wiki
Jump to navigation Jump to search
Line 20: Line 20:
 
# Twist the bulb holder one quarter turn anti-clockwise to remove. If this is difficult, you may find it easier to leave the cable connected as this will give you more purchase on the bulb holder.
 
# Twist the bulb holder one quarter turn anti-clockwise to remove. If this is difficult, you may find it easier to leave the cable connected as this will give you more purchase on the bulb holder.
 
# Remove the bulb holder from the assembly and change the bulb.
 
# Remove the bulb holder from the assembly and change the bulb.
 +
 +
=== Headlights ===
 +
# Open the bonnet
 +
# Remove the socket and the rubber cover
 +
# Unhook the bulb holding spring and replace the bulb
 +
 +
=== Front Clearance/Turn Signal/Side Turn Signal/ Rear combi/ Number Plate Light ===
 +
# To remove, simply pull out or push in the bulb.

Revision as of 17:50, 12 May 2016

Headlights

Application Bulb Fitting
Dipped and Main Beam H4 (472)
Side/Parking Lamp W5W (501)
Front Fog Lamp H3 (453)

Fitting

Side/Parking Lamp

  1. Open the bonnet
  2. The side lamp bulb holder is located at the outer edge of the headlight assembly
  3. Twist the bulb holder one quarter turn anti-clockwise to remove. If this is difficult, you may find it easier to leave the cable connected as this will give you more purchase on the bulb holder.
  4. Remove the bulb holder from the assembly and change the bulb.

Headlights

  1. Open the bonnet
  2. Remove the socket and the rubber cover
  3. Unhook the bulb holding spring and replace the bulb

Front Clearance/Turn Signal/Side Turn Signal/ Rear combi/ Number Plate Light

  1. To remove, simply pull out or push in the bulb.