File:Suzuki Jimny - 2WD-only edition - front axle, center part - A01.jpg
Jump to navigation
Jump to search
Size of this preview: 800 × 450 pixels. Other resolutions: 320 × 180 pixels | 1,280 × 720 pixels.
Original file (1,280 × 720 pixels, file size: 114 KB, MIME type: image/jpeg)
The front axle assembly in an "el-cheapo" 2WD-only Jimny, produced from 1998 to early 2000s.
Notice the complete absence of the front differential case - the front axle is a single-piece solid hollow tube. Such an axle is called "dead solid axle".
Also notice the absence of a front propeller shaft from the dummy transfer case.
Also notice that all the suspension components which connect to the front axle are the same as in a proper 4WD Jimny.
Unfortunately the front nudge bar obscures the upper view a bit.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 06:47, 25 July 2018 | | 1,280 × 720 (114 KB) | Bosanek (talk | contribs) | The front axle assembly in an "el-cheapo" 2WD-only Jimny, produced from 1998 to early 2000s. Notice the complete absence of the front differential case - the front axle is a single-piece solid hollow tube. Such an axle is called "dead solid axle". Al... |
- You cannot overwrite this file.
File usage
The following page links to this file:
