Drive belts

From BigJimny Wiki
Revision as of 20:00, 16 May 2016 by Mlines (talk | contribs)
Jump to navigation Jump to search

Drive Belts

This section covers the engine drive belts, their configurations and adjustment.

There are a number of combinations and it is essential you get the correct belt.

G13BB with Power Steering

G13BB with PAS
  • PAS: Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


G13BB with Power Steering and Aircon

G13BB with PAS and Aircon
  • PAS: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner


M13AA with Power Steering

M13AA with PAS

Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

M13AA with Power Steering and Aircon

M13AA with PAS and Aircon
  • PAS: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


M13AA with Aircon

M13AA with PAS
  • Aircon: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


Torque Settings

Full details of the torque settings can be found in the reference data


Page last edited on 16/05/2016 by user Mlines