Difference between revisions of "Deep mud and deep water terrain"

From BigJimny Wiki
Jump to navigation Jump to search
(Added a picture of a Jimny in deep waters)
m (Added the article into gen2 categories)
 
(7 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
== Introduction ==
 
== Introduction ==
  
 +
{{Gen1|}}{{Gen2|}}{{Gen3|}}{{Gen4|}}
 +
Although all Jimnys can be used for deep water wading or plowing through mud bogs if you install transmission breathers and the snorkel, bear in mind that all Jimnys have relatively poorly designed front wheel steering knuckles, which are prone to water/mud ingress.
  
Although Jimny can be used for deep water wading or plowing through mud bogs if you install transmission breathers and the snorkel, bear in mind that Jimny has relatively poorly designed front wheel steering knuckles, which are prone to water/mud ingress.
+
 
 +
Just keep in mind this generic off-roading formula:  <font face="Courier">'''mud = maintenance<sup>2</sup>'''</font>
 +
 
 +
It's even simpler than <font face="Courier">'''e = m*c<sup>2</sup>'''</font> ....
  
  
 
== Some technical notes ==
 
== Some technical notes ==
  
 
+
{{Gen1|}}{{Gen2|}}{{Gen3|}}{{Gen4|}}
 
* A steering knuckle contains kingpin bearings, a constant velocity joint, and two seals - one towards the axle and one towards the wheel hub.
 
* A steering knuckle contains kingpin bearings, a constant velocity joint, and two seals - one towards the axle and one towards the wheel hub.
 
* The axle contains the halfshaft and the differential.
 
* The axle contains the halfshaft and the differential.
Line 18: Line 23:
  
  
* Worn kingpin bearings are the main cause of notorious [[Death Wobble|"Death wobble"]] issue, which plagues the Jimnys and Samurais worse than any other vehicle model.
+
* Worn kingpin bearings are the main cause of notorious [[Death Wobble|"Death wobble"]] issue, which plagues all Jimnys worse than any other vehicle model.
  
  
* Replacement OEM CV joints are available from Suzuki only together pre-assembled with halfshaft at a '''horrendously''' high price.
+
* Replacement OEM CV joints for Jimnys 3 are available from Suzuki only together pre-assembled with halfshaft at a '''horrendously''' high price.
* Aftermarket replacement CVs are produced only by a handful of manufacturers.
+
** It is currently not known what Suzuki offers as replacement for broken CV joints on Jimnys 4.
* Jimnys made after 2005 typically have a different CV joints compared to older Jimnys, and those CV joints are (as far as it is known) made by only one aftermarket manufacturer, Herth+Buss.
+
* Aftermarket replacement CV joints for Jimnys 3 are produced only by a handful of manufacturers.
* Good luck obtaining them!
+
* Jimnys 3 made after 2005 typically have different CV joints compared to older Jimnys 3, and those CV joints are (as far as it is known) made by only two aftermarket manufacturers, Herth+Buss and NKN.
 +
** Good luck obtaining them!
  
  
 
== Solutions ==
 
== Solutions ==
  
 
+
{{Gen1|}}{{Gen2|}}{{Gen3|}}{{Gen4|}}
 
* It is very hard to prevent water/mud ingress in the steering knuckles.
 
* It is very hard to prevent water/mud ingress in the steering knuckles.
 
* Use of some hardcore sticky waterproof grease on the kingpin bearings and in the CV joint can help to deter water and mud for a while, but that's it.
 
* Use of some hardcore sticky waterproof grease on the kingpin bearings and in the CV joint can help to deter water and mud for a while, but that's it.
Line 38: Line 44:
 
== Conclusion ==
 
== Conclusion ==
  
[[File:Suzuki Jimny - in deep water - A01.jpg|320px|thumb|left|When a Jimny (or any vehicle for that matter) is in deep water, so is your wallet]]
+
{{Gen1|}}{{Gen2|}}{{Gen3|}}{{Gen4|}}
 +
[[File:Suzuki Jimny - in deep water - A01.jpg|320px|thumb|left|When a Jimny (or any vehicle for that matter) is in deep mud or (especially) in deep water, so is your wallet]]
  
 
* Based on the facts, it's best to keep Jimny away from mud bogs and deep water.
 
* Based on the facts, it's best to keep Jimny away from mud bogs and deep water.
Line 44: Line 51:
  
 
* If you want to get really filthy on a regular basis, use a Toyota Land Cruiser, Mercedes G-Wagen, Nissan Patrol, or something else that was 3-6x more expensive than a Jimny when it was new.
 
* If you want to get really filthy on a regular basis, use a Toyota Land Cruiser, Mercedes G-Wagen, Nissan Patrol, or something else that was 3-6x more expensive than a Jimny when it was new.
 +
** Mud & water do take a toll on those vehicles too.
  
  
 
* Otherwise, be ready to become a trained expert at working on Jimny's front wheel assembly.
 
* Otherwise, be ready to become a trained expert at working on Jimny's front wheel assembly.
 
<br clear=all>
 
<br clear=all>
 +
 +
[[File:Suzuki Jimny - in deep mud - A01.jpg|480px|thumb|left|Rolling any vehicle in a mud pit like this might cost you the same as rolling in a champagne pit!]]
 +
<br clear=all>
 +
  
 
{{Edited}}
 
{{Edited}}
[[Category:Offroading]]
+
 
 +
[[Category:Offroading - gen2]]
 +
 
 +
[[Category:Offroading - gen3]]
 +
 
 +
[[Category:Offroading - gen4]]

Latest revision as of 12:18, 17 January 2021

Note Icon.pngThe content of any article might be expanded / improved in the future - revisit it sometimes.
Note Icon.pngSeen a mistake? Know something that isn't written? Edit and change this article yourself!
Note Icon.pngSome images in the article (if present) can be enlarged by clicking on them.

Introduction

LJ-100x100.jpg


SJ-100x100.jpg


Gen3-100x100.jpg


Gen4-100x100.jpg


Although all Jimnys can be used for deep water wading or plowing through mud bogs if you install transmission breathers and the snorkel, bear in mind that all Jimnys have relatively poorly designed front wheel steering knuckles, which are prone to water/mud ingress.


Just keep in mind this generic off-roading formula: mud = maintenance2

It's even simpler than e = m*c2 ....


Some technical notes

LJ-100x100.jpg


SJ-100x100.jpg


Gen3-100x100.jpg


Gen4-100x100.jpg


  • A steering knuckle contains kingpin bearings, a constant velocity joint, and two seals - one towards the axle and one towards the wheel hub.
  • The axle contains the halfshaft and the differential.
  • The wheel hub assembly contains the wheel bearing, the vacuum chambers for the front wheel hubs, etc.


  • Water (especially dirty water) and mud grind the kingpin bearings, CV joints, seals, etc.


  • Worn kingpin bearings are the main cause of notorious "Death wobble" issue, which plagues all Jimnys worse than any other vehicle model.


  • Replacement OEM CV joints for Jimnys 3 are available from Suzuki only together pre-assembled with halfshaft at a horrendously high price.
    • It is currently not known what Suzuki offers as replacement for broken CV joints on Jimnys 4.
  • Aftermarket replacement CV joints for Jimnys 3 are produced only by a handful of manufacturers.
  • Jimnys 3 made after 2005 typically have different CV joints compared to older Jimnys 3, and those CV joints are (as far as it is known) made by only two aftermarket manufacturers, Herth+Buss and NKN.
    • Good luck obtaining them!


Solutions

LJ-100x100.jpg


SJ-100x100.jpg


Gen3-100x100.jpg


Gen4-100x100.jpg


  • It is very hard to prevent water/mud ingress in the steering knuckles.
  • Use of some hardcore sticky waterproof grease on the kingpin bearings and in the CV joint can help to deter water and mud for a while, but that's it.
  • There is not much more that can be done to defend the steering knuckles against water and mud.


Conclusion

LJ-100x100.jpg


SJ-100x100.jpg


Gen3-100x100.jpg


Gen4-100x100.jpg


When a Jimny (or any vehicle for that matter) is in deep mud or (especially) in deep water, so is your wallet
  • Based on the facts, it's best to keep Jimny away from mud bogs and deep water.


  • If you want to get really filthy on a regular basis, use a Toyota Land Cruiser, Mercedes G-Wagen, Nissan Patrol, or something else that was 3-6x more expensive than a Jimny when it was new.
    • Mud & water do take a toll on those vehicles too.


  • Otherwise, be ready to become a trained expert at working on Jimny's front wheel assembly.


Rolling any vehicle in a mud pit like this might cost you the same as rolling in a champagne pit!




Page last edited on 17/01/2021 by user Bosanek