Cabin filter change

From BigJimny Wiki
Revision as of 15:52, 14 April 2018 by Bosanek (talk | contribs) (Some more info about original and replacement cabin filters)
Jump to navigation Jump to search

Note Icon.pngThe content of any article might be expanded / improved in the future - revisit it sometimes.
Note Icon.pngSeen a mistake? Know something that isn't written? Edit and change this article yourself!
Note Icon.pngSome images in the article (if present) can be enlarged by clicking on them.


Introduction

It appears that most people do not realize that the Jimny has a cabin / pollen filter, or at least has the facility for a cabin filter.

Most manuals never refer to it, even in the OEM Service Guide.

A lot of people, particularly those who drive off-road, are tired of the clouds of leaves that hit you in the face when you open the fascia vents. Fitting a cabin filter is straight forward once you know where it is hidden.

If your Jimny already has a cabin filter installed (but you have not been aware of it), the filter is probably heavily clogged.


Old, dirty, clogged cabin filter
  • This is an example of a cabin filter which has not been changed for at least five years.
  • This filter was almost white when it was new.
  • That picture was taken after the leaves and grit were brushed off off from the filter.
  • The weight of that dirty filter was around 800 grams!



Required parts

The filter itself

The part numbers of Suzuki's genuine cabin / pollen filters for Jimnys are:

  • 95860-81A00
  • 95860-81A01
  • 95860-81A10

All three should be mutually compatible (same dimensions etc.) and the differences are probably "only" in the filtering quality / capability.


File:Cabin filter.jpg
Brand new Blue Print ADK82502 cabin filter



Note Icon.pngThe appearance and construction of a cabin filter may vary slightly from one manufacturer to another. Some filters are one-part like in the picture above. Some are two-part, and the parts can be glued or taped together (like in the picture below). Always make sure to check the dimensions.


Note Icon.pngThe quality of a filter may vary significantly from one manufacturer to another. The main difference is in the presence or absence of various filtering elements which filter out certain things. For example, a filter with or without carbon particles.




Filter cover

Genuine cabin filter cover
  • You may wish to consider buying a spare cabin filter cover at the same time.
  • The part number of Suzuki's genuine cabin / pollen filter cover for Jimnys is: 95423-81A01
  • The suitable cover is also offered in BigJimny Shop.


Warning Icon.pngIt is common to break the filter cover when removing it as the plastic becomes brittle.




Changing / Installing a cabin filter

Tools

Spanner Icon.png
  • Assorted screwdrivers or blade


Warning Icon.pngI cannot emphasis too strongly how easy it is to break the old cover!




Installation

Passenger footwell
  • Here is the filter cover, up underneath the dashboard on the passenger side of the vehicle



Here is the cover in the footwell



Open brake caliper
  • First remove the glovebox.
  • This is done by flexing the sidewalls so the plastic retaining lugs can drop past the edge of the fascia.
  • Lower the whole glovebox away.
  • I am using a screwdriver with the end protected by a cloth to stop it marking the fascia, as I use it to prise away the retaining lugs.



Cabin filter cover retaining clips



Glovebox dropped open
  • The filter cover is retained by small clips on the end.
  • The tip of the scewdriver points to where the clip is (hidden).



Using blade to prise clip
  • Warm the plastic filter cover.
  • Either use a hairdrier or allow the car's own heater to warm the car (on re-circulate setting).
  • If the plastic is cold it is more likely to fracture.
  • Insert a small blade into the filter retaining lugs and gently prise it away from the edge of the moulded catches on the heater body.
  • Do this a bit at a time alternating front and back.



Inserting the cabin filter
  • If you have a UK Jimny, you are more than likely to find an empty hole now (full of bits of leafs).
  • Simply insert the cabin filter.



Press the new cover on
  • Gently press the filter cover back into place.



Broken!!
  • Don't think that you will be immune to breaking the filter cover - here is mine!




Page last edited on 14/04/2018 by user Bosanek