The content of any article might be expanded / improved in the future - revisit it sometimes.
Seen a mistake? Know something that isn't written? Edit and change this article yourself!
Some images in the article (if present) can be enlarged by clicking on them.
THIS GUIDE IS IN PROCESS OF BEING WRITTEN
Introduction
This installation guide is primarily for fitting the NON-ABS auxiliary battery tray into a Jimny 3, which can be sourced from Jimnybits or other reputable sellers. This guide does not cover the ABS battery tray installation, although steps / parts may be similar.
The guide was written by forum user Siddo (with some images sourced from JimnyBits website) and transferred into this wiki by forum user Bosanek.
Required parts
The provided kit from JimnyBits comes complete with a few separate parts, which are labelled alphabetically where possible throughout the guide. They are 'bold italic in the text.
- A : NON-ABS battery tray
- B : Coolant reservoir platform
- C : Battery ratchet strap
- D : Battery tray fixing bolts (not shown above, reused from vehicle)
- E : Battery tray fixing cross head bolt (not shown above, provided with kit)
- F : Vehicle washer reservoir bolts (not shown above, provided with kit)
- H : Coolant reservoir tie wrap / cable ties (not shown above, provided with kit)
Page last edited on 9/01/2020 by user Bosanek