×
BigJimny Meet - 2020 (01 Nov 2019)


Its the big one! The 50th Anniversary of the Jimny.

17th May 2020

Parkwood (Tong - near Leeds)

£35

BOOKING OPEN - CLICK HERE TO BOOK

Event details are HERE

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.[/size][/color][/b]

Help please on 1.6 liana engine

More
05 Feb 2015 11:52 #136950 by Chazg83
Hey guys, need a bit off help we got a m16a engine at work and it's out the car already and just not 100% sure how to tell if it's a non vvt engine? And what else is involved in swaping them over? Cheers any help will be great


Attachments:

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:00 #136999 by Chazg83
Anything

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:02 #137001 by mickt
Whats' that black stuff coming out of the engine?

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:05 #137003 by idiotmobil
sure the liana engine is a straight swap nothing to do

JIMNYLESS

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:07 #137004 by Chazg83

mickt wrote: Whats' that black stuff coming out of the engine?

Shrink wrap to stop crap getting in

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:08 #137006 by Chazg83

idiotmobil wrote: sure the liana engine is a straight swap nothing to do

Is it just use jimny manifolds and injectors and ecu and do you use the jimny sump and oil pick up or liana ones ok?

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:10 #137007 by Chazg83

idiotmobil wrote: sure the liana engine is a straight swap nothing to do

How can you tell if it's non vvt as my Jims 2000 non vvt

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:14 #137008 by j999pre
It's a non vvt. No extra bulge on cam cover or cam activator on front.

Lots to swop over but all doable

Gold Jimny the best colour (sold) :(

Big red Jimny now. 32" tyres, arbs, cage 5:1 transfer etc.

Also grey pick up nearly finished.
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:15 #137009 by Chazg83

j999pre wrote: It's a non vvt. No extra bulge on cam cover or cam activator on front.

Lots to swop over but all doable

Cool, what do you need to swap over to put in the jimny? Cheers

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:21 #137010 by j999pre
Jimny sump and oil pick up pipe
Jimny crank pulley
Jimny manifolds with liana injectors
Jimny rocker cover and dip stick
Studs x3 removed from front engine mount liana then remove water way plug and replace with jimny elbow
Jimny thermostat etc into back of liana water pump
Jimny engine mounts complete
Remove liana oil filter housing and fit jimny type (buy new)
Jimny flywheel
Remove alloy bottom plate from liana engine
Jimny water pump pulley and studs
Swap over all the jimny wiring
Think that is it off the top of my head

Gold Jimny the best colour (sold) :(

Big red Jimny now. 32" tyres, arbs, cage 5:1 transfer etc.

Also grey pick up nearly finished.
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
The following user(s) said Thank You: minibbb, Chazg83

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 20:30 #137012 by Chazg83

j999pre wrote: Jimny sump and oil pick up pipe
Jimny crank pulley
Jimny manifolds with liana injectors
Jimny rocker cover and dip stick
Studs x3 removed from front engine mount liana then remove water way plug and replace with jimny elbow
Jimny thermostat etc into back of liana water pump
Jimny engine mounts complete
Remove liana oil filter housing and fit jimny type (buy new)
Jimny flywheel
Remove alloy bottom plate from liana engine
Jimny water pump pulley and studs
Swap over all the jimny wiring
Think that is it off the top of my head

Ok cool cheers for the help, shouldn't be to bad to do :-)

Please Log in or Create an account to join the conversation.

Time to create page: 0.151 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.