×
Search (23 Feb 2018)

A trial enhanced search facility has been enabled. Please use the Google Custom Search above.

× Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

My 01 Jimny, another Norwegian

More
31 Aug 2017 09:38 #183788 by Keithy

MadsV wrote: If i was to buy a boot floor again I would consider bying this original one from Japan instead for a bit more money.
https://www.amayama.com/en/part/suzuki/6210081811

Hmmm now that's a sock on a hens head fit......Not quite as bad as OJ's glove mind.

Please Log in or Create an account to join the conversation.

More
31 Aug 2017 12:14 #183790 by MadsV
Haven't had time to do anything with the car this week, better luck next week! Got my exhaust from ebay today, looks ok. Picked up the baleno yesterday tho, engine is almost out. drove it on three cylinders to the garage, plugged out second coil and it still ran on three so i figure its the coil

Norwegian 01 Jimny
G16B
2” Trail Master
215/75-15 -15 offset wheels

Please Log in or Create an account to join the conversation.

More
02 Sep 2017 07:18 #183810 by MadsV
Engine out of the baleno, and useful parts on my old Carry taken out. Time to see the scrap yard

Norwegian 01 Jimny
G16B
2” Trail Master
215/75-15 -15 offset wheels

Please Log in or Create an account to join the conversation.

More
04 Sep 2017 17:38 #183875 by MadsV
Mounted the cheap ebay exhaust, perfect fit. Primed the front bumper aswell

Norwegian 01 Jimny
G16B
2” Trail Master
215/75-15 -15 offset wheels

Please Log in or Create an account to join the conversation.

More
04 Sep 2017 18:40 #183876 by Iaitoo
Nice! Having access to a lift, makes everything a bit easier ^^

Which exhaust did you buy?

Please Log in or Create an account to join the conversation.

More
04 Sep 2017 18:50 #183877 by MadsV
https://www.ebay.com/itm/401230770225
Yes it makes everything easier!

Norwegian 01 Jimny
G16B
2” Trail Master
215/75-15 -15 offset wheels

Please Log in or Create an account to join the conversation.

More
04 Sep 2017 20:20 #183879 by Keithy
Genuine ebay parts are the best way to go!

Please Log in or Create an account to join the conversation.

More
08 Sep 2017 17:19 #183950 by MadsV
Finally had some time to paint
Base coat done, time for some clear Painted the boot floor the same colour, i know its not the same as inside but its not visible anyways As you can see I went all red bumpers, mostly because im lazy but havent seen anyone with all red so why not try. Think it looks good

Norwegian 01 Jimny
G16B
2” Trail Master
215/75-15 -15 offset wheels
The following user(s) said Thank You: Iaitoo

Please Log in or Create an account to join the conversation.

More
10 Sep 2017 13:50 #183981 by MadsV
Put in the floor today! Changed the hinges also. Old hinges done their part, changes the bolts also. Sprayed with rust preventive before putting the boot in, and cavity wax. Rotabond on underneath also Put 2 screws in the back

Norwegian 01 Jimny
G16B
2” Trail Master
215/75-15 -15 offset wheels

Please Log in or Create an account to join the conversation.

More
12 Sep 2017 20:18 #184070 by MadsV

Fitted the bumpers, rest of the car is in need of some detailing! Arches and underneath boot floor filled with Mercasol3 thick rust preventive. New joint. Fixed all the MOT faults now, road legal again before the weekend! :)

Norwegian 01 Jimny
G16B
2” Trail Master
215/75-15 -15 offset wheels

Please Log in or Create an account to join the conversation.

More
14 Sep 2017 11:26 #184115 by Daniel30
Coming along nicely ;)
If I worked there I would be tempted to get the rest of the Jimny in that spray booth, that red on the bumpers looks great :)

Please Log in or Create an account to join the conversation.

More
15 Sep 2017 05:34 #184143 by MadsV
It's tempting! Just dont have the time right now. Put in more sound deadening plates

Norwegian 01 Jimny
G16B
2” Trail Master
215/75-15 -15 offset wheels

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.250 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.