×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - EARLY BIRD DISCOUNTED PRICE
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Cooling system pipes
- RiverRatJimny
- Topic Author
- Visitor
-
Public
06 Mar 2019 10:38 #204180
by RiverRatJimny
Cooling system pipes was created by RiverRatJimny
Chaps- is a cooling system pipe a main dealer purchase? Anywhere that people know of that might stock them? 1998 Jimny. I have a leaking one - it's the lower one that clips onto the engine block, it's split at the daisy clip. Topping up the rad about half a litre per week at the mo. I have stemmed the flow with the stronger radweld but it's not ideal- the other option would be to cut it at the clip and re-fit, but that would make it shorter, which might mean it wouldn't reach where it needs to etc- so I'd rather replace it.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8787
- Thank you received: 1755
- Points: 36118.00
06 Mar 2019 11:00 #204185
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Cooling system pipes
Send a message including your registration number via the shop at the top of the page, Martin who owns the site will be able to get you the correct one at a very reasonable price.
Da ja vu?
Da ja vu?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
06 Mar 2019 11:36 #204188
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Cooling system pipes
Would need to establish which exactly one you need but currently
Bottom hose part 1 £11.34
Bottom hose part 2 £25.08
Bottom hose part 1 £11.34
Bottom hose part 2 £25.08
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: RiverRatJimny
Please Log in or Create an account to join the conversation.
- RiverRatJimny
- Topic Author
- Visitor
-
Public
06 Mar 2019 12:54 #204190
by RiverRatJimny
Replied by RiverRatJimny on topic Cooling system pipes
Great- I'll take a look later tonight when I get home. Thanks
Please Log in or Create an account to join the conversation.
Time to create page: 0.088 seconds