Clink noise from wheels

I have an issue when turning wheels especially in full lock I am hearing a clinking noise
Started from balljoints but seem ok what can it be

Cvs ?

Do not think it is cv cause 4 wheel works well

You can have a knackered CV joint and working 4wd.

If you have a regular clunk/clang on full lock it sounds like a worn CV joint. Noise frequency should change depending on car speed, speed up = noise speeds up. Noise should happen at car park speed if you want to get a mate to drive round you.
Irregular noise that doesnt really speed up or happens more on bumpy road is more likely to be a ball joint/track rod end/anti roll bar link/wheel bearing.

What made you suspect the ball joints? Is there play in them?

Remote diagnosis is often nearly impossible.

Can you explain further what you mean by 4 wheel works well?

Can you upload a video with the noise so we can listen?

Worn Cvs of this type can still work when worn and clicking.

It makes the noise just when parking and car not moving

King pin bearings or a track rod end. It won't be the CV joints because they aren't turning unless you are parking with it in 4wd.

is there a way to chq before changing them pls