BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



See HERE for details - See HERE for discussion

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Rear shock mount issues

  • Posts: 1065
  • Thank you received: 146
  • Points: 61.00
10 Aug 2018 18:25 - 10 Aug 2018 18:26 #194996 by mickt
Replied by mickt on topic Rear shock mount issues
Not everybody can fabricate and weld to the required standard required on this item. Some say they can. Look at the chap who has already had a go at the repair!!
Last edit: 10 Aug 2018 18:26 by mickt.

Please Log in or Create an account to join the conversation.

  • Posts: 2707
  • Thank you received: 216
  • Points: 15.00
10 Aug 2018 21:19 #195011 by TomDK
Replied by TomDK on topic Rear shock mount issues
Seriously.. if you can weld just adequately, you can do it. I know what you mean. But even considering a new axle casing due to broken shock mount, makes me think perhaps an old Jimny is not the right vehicle then.

+3" Trail Master. Fox 8.0" R/R shocks. ORA HD winchbumper. Warn M8274 Ox-motor + Hellfire gears, Delta-Tek mainshaft and freespool, overvolted. 33/9.5 R16 Silverstone Extreme. 5.14:1 ratio SJ transferbox in RW cradle. OMP rollcage.

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.102 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.