×
BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



20TH OCTOBER 2019

BOOKING NOW CLOSED


If you have booked you will shortly receive joining instructions- See HERE for discussion


Noggin and Natter - pre-event chat - Old Bell at Grazeley (part of hotel) 7:30pm 19th October

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Single Internal Roll-Over Hoop.

More
20 Jun 2016 16:18 - 21 Jun 2016 07:45 #168910 by viciouspenguin
Go hard or go home, so the saying goes. Well i would like to go hard and then go home in one piece after.

I'd like to fit a single internal roll-over hoop should the worse happen. I can't find any on t'internet any suggestions?

silverjimny.co.uk
bigbox-3d.com
Last edit: 21 Jun 2016 07:45 by viciouspenguin.

Please Log in or Create an account to join the conversation.

More
20 Jun 2016 16:49 #168913 by OllieNZ
Will have to be a one off most likely. Try rhino rays or the off road armoury. Also worth looking at the MSA spec.

Please Log in or Create an account to join the conversation.

More
20 Jun 2016 16:54 #168915 by viciouspenguin
is Rhinorays still going?

silverjimny.co.uk
bigbox-3d.com

Please Log in or Create an account to join the conversation.

More
20 Jun 2016 17:20 #168920 by OllieNZ

viciouspenguin wrote: is Rhinorays still going?

According to his website.....

Please Log in or Create an account to join the conversation.

More
More
20 Jun 2016 18:27 #168930 by viciouspenguin
I shall inquire tomorrow!

silverjimny.co.uk
bigbox-3d.com

Please Log in or Create an account to join the conversation.

More
20 Jun 2016 20:28 #168939 by supergaz
Rockwatt

Please Log in or Create an account to join the conversation.

More
22 Jun 2016 13:16 - 22 Jun 2016 13:17 #168993 by JuanGuillie
This is my internal rollcage.
The middle-hoop is fixed at the upper and lower safetybelt fixings.
At he bottom of it i have a lateraltube that is welded to the hoop and fixed at the four fixings off the backseats.
Hope this can give you a idea.







Attachments:
Last edit: 22 Jun 2016 13:17 by JuanGuillie.

Please Log in or Create an account to join the conversation.

More
22 Jun 2016 18:26 #169003 by viciouspenguin
Nice!

Do you make it?

silverjimny.co.uk
bigbox-3d.com

Please Log in or Create an account to join the conversation.

More
22 Jun 2016 19:23 #169008 by JuanGuillie
No, a friend of mine did it because i can't weld and i think sending a new made one over from Belgium to England will cost you as much as you buy one from one of your local shops.

Please Log in or Create an account to join the conversation.

More
22 Jun 2016 20:25 - 22 Jun 2016 20:28 #169015 by TomDK

viciouspenguin wrote: Nice!

Do you make it?


Maybe looking nice. But that cage is nowhere nearly as strong a a cage with a main hoop with proper diagonal tubing. When having a cage made make sure it's by someone that knows their stuff.

+3" Trail Master. Fox 8.0" R/R shocks. ORA HD winchbumper. Warn M8274 Ox-motor + Hellfire gears, Delta-Tek mainshaft and freespool, overvolted. 33/9.5 R16 Silverstone Extreme. 5.14:1 ratio SJ transferbox in RW cradle. OMP rollcage.
Last edit: 22 Jun 2016 20:28 by TomDK.

Please Log in or Create an account to join the conversation.

More
23 Jun 2016 14:59 #169048 by maverick
Take a look at Dave's S200KYS build project - he has a bespoke internal cage

www.bigjimny.com/index.php/forum?view=topic&catid=18&id=53695 - mid way through Page-5

Jalapeño, IISY?
The following user(s) said Thank You: S200KYS

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.213 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.