×
BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



20TH OCTOBER 2019

BOOKING NOW CLOSED


If you have booked you will shortly receive joining instructions- See HERE for discussion


Noggin and Natter - pre-event chat - Old Bell at Grazeley (part of hotel) 7:30pm 19th October

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.[/size][/color][/b]

Cam follower rail

More
02 Jul 2019 18:29 #210519 by stillair1
Cam follower rail was created by stillair1
Hi all
I'm attempting to replace the valve seals on a 2000 yr model Jimny. I was hoping to do this without lifting the head, but it seems the rail holding the lifters will only slide out from the back off the engine. towards the firewall. Am I correct. Thanks in advance for your advice.
Neil

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.135 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.