BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



See HERE for details - See HERE for discussion

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the


  • Posts: 8
  • Thank you received: 0
  • Points: 0.00
10 Aug 2018 06:18 #194960 by 243
Heater was created by 243
Hi everyone new so be kind just bought myself a 04 mode very clean runs very well , but I have a problem no big but it could be before long the heater doesn’t work just cold air . If any one has any suggestions before I take it to a garage ,thanks

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Away
  • Moderator
  • Moderator
  • The quickest Jimny in Harrogate...(that I own)
  • Posts: 3933
  • Thank you received: 654
  • Points: 6085.00
  • Gen 3 Jimny GV (2010) Gen 3 Jimny
10 Aug 2018 06:30 #194961 by Lambert
Replied by Lambert on topic Heater
Welcome to the forum. Viewing from either front foot well there are white plastic arms that control the heater box. They are exposed and prone to being kicked and either breaking or having the control cables dislodged. Check both sides are intact and connected.

Dreadnaught (black 2011)

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.051 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.