The owner and site administrator of BigJimny

Lil Red - SJ restoration - Moving on to the body tub

Lil Red - SJ restoration - Moving on to the body tub

Winchfield Engineering have moved on to starting work on the body tub.

We always knew this was the bad spot as it had some visible rust on the outside, however it can be a bit of a shock as to how bad a "good" car can be.

Here on the drivers side rear we can see the panels that create the rear of the arch have trapped water etc and quietly corroded inside. 

  924 Hits
Tags:

Another SJ Build - Sam's Yellow SJ - An update

image1

Sam has sent in an update on the progress of his SJ. Many thanks Sam!

These SJ restoration projects are proving popular at the moment, if you have some work in progress why not send in the details to show them on this website? 

As you can see, the body was stripped of all major components and then removed from the chassis.

In Sam's case this was to assist in a planned upgrade from the 4 speed gearbox to a 5 speed along with a general rebuild of the transmission.

  1136 Hits
Tags:

Lil Red - SJ restoration - Panel work progressing

SJ-rebuid-77

Winchfield Engineering have sent over this update showing the progress on the panels. 

The process is the same on all the panels.

They are inspected for corrosion and any corrosion spots are sandblasted clean to remove all the rust.

Here, on the tail gate, you can see where the corrosion has been cleaned away from the mounting holes where a small amount of surface rust existed.

  1040 Hits
Tags:

Lil Red - SJ restoration - First look at the panels.

SJ-rebuid-53

With the bolts in full retreat, Winchfield Engineering had a first look at the body panels.

Around the rear, with the wing panels and taligate removed, some more rust became visible.

This is behind the panel, so can be fixed with some fabrication rather than a replacement panel.

On the left you can see the end of the rear crossmember which will need some work to ensure the rust is completely removed

It looks worse than it is really, it should clean up fairly easily. 

  1095 Hits

Lil Red - SJ restoration - Attacking the rusted bolts

SJ-rebuid-55

As you will have seen in the last post, a number of the large hinge and panel bolts are rusted solid, so Winchfield Engineering needed to get serious!

 In the picture on the left you can see a nut being held onto the bolt using MoleGrips.


They went around the SJ, welding nuts on all the stuck bolts

  967 Hits
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.